Black Cast Iron Table Base Round Ø510x720mm | TurcoBazaar F015A

Black Cast Iron Table Base Round Ø510x720mm | TurcoBazaar F015A
Black Cast Iron Table Base Round Ø510x720mm | TurcoBazaar F015A
Black Cast Iron Table Base Round Ø510x720mm | TurcoBazaar F015A
Black Cast Iron Table Base Round Ø510x720mm | TurcoBazaar F015A
Black Cast Iron Table Base Round Ø510x720mm | TurcoBazaar F015A
This offer ends in:
Days
Hours
Min
Sec
from Save -60%
£75.60
£189.60
Ex Tax: £75.60
  • Stock: In Stock
  • Brand: Zodex
  • Model: F015A
  • SKU: F015A
Sold: 1
Views: 742
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The F015A is a cast iron table base engineered for commercial dining operations. It supports tabletops up to typical restaurant service loads in cafés, bars, and full-service restaurants. Base diameter of 510mm and 16kg mass provide stability during patron use.

Commercial Application

Deployed in front-of-house dining areas where table stability under continuous service load is non-negotiable. The 720mm height suits standard seating configurations. Cast iron construction absorbs vibration and resists displacement during service.

Operators mount wooden, laminate, or composite tabletops to the 350mm top plate. The round base footprint minimises floor contact area while distributing load evenly. Black powder-coated finish conceals wear in high-traffic dining zones.

Key Operational Advantages

  • Cast iron construction — 16kg mass stabilises tabletops during patron use
  • Ø510mm base footprint — distributes load without excessive floor coverage
  • 350mm top plate — accepts standard commercial tabletop mounting patterns
  • 720mm height — matches standard dining chair seat height of 450mm
  • Black powder-coated finish — resists surface corrosion and wear marks
  • CE certified — meets commercial hygiene and structural safety standards

Technical Specifications

SpecificationDetails
Model / SKUF015A
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight16.0 kg (35.3 lbs)

Construction & Build Quality

Cast iron core provides dimensional stability under repeated load cycles. Powder-coated finish bonds to metal surface for abrasion resistance. Welded top plate and base interface eliminates mechanical fastener points that loosen over service life.

  • Cast iron — maintains geometry under sustained vertical and lateral forces
  • Powder-coated black finish — single-stage application bonds to substrate
  • Welded top plate — 350mm mounting surface without bolt-through joints

Suitable Operations

  • Restaurants
  • Hotels
  • Catering businesses
  • Food trucks
  • Commercial kitchens

Procurement & Support

TurcoBazaar supplies F015A table bases from UK warehouse stock. Worldwide freight available: UK mainland, Europe, USA, Canada, Middle East, Africa. Bulk orders ship on pallet for reduced unit freight cost.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical load specifications or freight quotation on pallet quantities. WhatsApp available for rapid commercial enquiry response.
Contact Our Team

Frequently Asked Questions

Q: Is the F015A suitable for outdoor dining installations?

A: Powder-coated finish provides moderate corrosion resistance. Covered patio use acceptable. Unprotected outdoor exposure accelerates finish degradation and requires periodic refinishing.

Q: What tabletop load capacity does the base support?

A: 16kg base mass and 510mm footprint support typical commercial tabletops up to 1200mm diameter with seated patron loads. Consult TurcoBazaar for specific load calculations.

Q: Does TurcoBazaar ship F015A bases internationally?

A: Yes. Worldwide freight from UK warehouse to Europe, USA, Canada, Middle East, and Africa. Multi-unit orders ship on pallet with reduced per-unit freight cost.

Q: Are replacement top plates available if mounting holes require modification?

A: TurcoBazaar supplies replacement 350mm top plates and provides mounting hole drilling guidance. Welded plate replacement requires professional metalwork services.

Q: What after-sales support does TurcoBazaar provide for table bases?

A: 12-month spare parts warranty covers manufacturing defects. Technical support includes refinishing specifications and load capacity consultation. Contact via phone or WhatsApp for commercial enquiries.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.