Black Steel Barstool with Walnut seat | TurcoBazaar GS60502

Q: What is the maximum user weight capacity for the GS60502 barstool?

A: The welded steel frame supports up to 120 kg static load under CE commercial seating standards. Frame design distributes weight across the 400 × 400 mm base footprint. Walnut seat through-bolt mounting prevents seat deflection under load.

Q: Can the walnut seat be replaced if damaged during service?

A: Yes. The seat detaches via four M6 bolts accessible from the underside. Replacement walnut seats are available as spare parts from TurcoBazaar. Typical replacement time is under 5 minutes with a 10 mm spanner.

Q: Is the powder-coated frame resistant to cleaning chemicals used in commercial kitchens?

A: The powder coat withstands diluted quaternary ammonium sanitizers, bleach solutions up to 1000 ppm, and alkaline degreasers at pH 11. Avoid undiluted bleach or abrasive scouring pads. Daily wiping with standard multipurpose cleaner maintains finish integrity.

Q: What is the minimum clearance required between stools for comfortable seating?

A: Allow 600–750 mm center-to-center spacing for unrestricted entry and exit. The 400 mm frame width requires 200–350 mm gap between adjacent units. Higher spacing values suit operations where patrons wear coats or carry bags.

Q: Does the stool require floor anchoring in high-traffic bar areas?

A: Floor anchoring is not required under normal use. The 400 × 400 mm base provides adequate stability on level surfaces. Operators may drill and bolt the frame to concrete floors in high-vibration environments such as music venues.