







Ask a Question About This Product
This offer ends in:
The DPSD600X1410 is a double-bowl pot wash sink designed for medium-volume commercial kitchens. Each bowl measures 610×450×400mm, with a 120mm rear splashback and 3.5-inch drainage outlets. Operators use it for manual cleaning of cookware, utensils, and food preparation equipment in hotels, restaurants, and catering facilities.
Commercial Application
Pot wash stations handle heavy cookware that cannot pass through standard commercial dishwashers. This unit provides two independent wash zones, allowing staff to separate cleaning stages or process different item types simultaneously. The 1410mm length accommodates large stock pots, baking trays, and commercial-scale utensils.
Kitchen porters and prep staff operate the unit throughout service and cleanup periods. Bowl depth of 400mm prevents water splash during high-volume washing. The 32kg weight and flat-pack delivery suit installations where freight access or stairwell clearance is restricted.
Key Operational Advantages
- Two 610×450×400mm bowls provide 110-litre combined wash capacity
- 120mm splashback reduces wall moisture damage in wet environments
- 89mm drain holes accept commercial waste fittings with standard basket strainers
- 600mm depth fits standard kitchen run dimensions without custom fabrication
- Plastic bullet feet allow minor height adjustment on uneven floor surfaces
- 32kg shipping weight enables two-person installation without lifting equipment
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | DPSD600X1410 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 32.0 kg (70.5 lbs) |
Construction & Build Quality
Zodex manufactures the unit from commercial-grade stainless steel with welded seams and reinforced corners. The material resists corrosion from detergents, hot water, and acidic food residues. Plastic adjustable feet provide stability and accommodate floor irregularities up to 15mm.
- Stainless steel construction meets CE, NSF, and CSA hygiene standards
- Welded corners prevent water ingress and bacterial harbourage
- Flat-pack design reduces freight volume by 60% compared to assembled units
- Adjustable feet compensate for uneven concrete or tile substrates
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial equipment from UK inventory to buyers in Europe, North America, the Middle East, and Africa. The unit ships flat-packed with assembly hardware and installation guidance. Standard freight covers UK mainland; international buyers receive customs documentation and landed cost estimates before dispatch.
Frequently Asked Questions
Q: What grade of stainless steel is used in the DPSD600X1410?
A: Zodex constructs this model from commercial-grade stainless steel suitable for wet commercial environments. Contact TurcoBazaar with your hygiene certification requirements for material grade confirmation and mill test certificates.
Q: What is the maximum load capacity per bowl?
A: Each bowl supports approximately 110 litres of water plus typical cookware loading. The frame and feet are rated for static loads encountered during normal pot washing operations. Avoid standing in bowls or placing concentrated weight on bowl edges.
Q: Are the legs adjustable for uneven floors?
A: Plastic bullet feet provide approximately 15mm of height adjustment per leg. This compensates for minor substrate irregularities. Floors with greater variation require levelling compound or shims before installation.
Q: Can I remove the splashback if not needed?
A: The 120mm splashback is welded to the main body during manufacture and cannot be removed. Buyers requiring units without splashbacks should specify this before ordering. Custom fabrication lead time is 3–4 weeks.
Q: Is custom sizing available for tighter kitchen layouts?
A: Zodex accepts custom dimension orders with minimum quantities of 5 units. Lead time extends to 6–8 weeks for non-standard configurations. Contact TurcoBazaar with your required dimensions and installation drawings for feasibility assessment.