Commercial Manual Meat Tenderiser | TurcoBazaar MTS737

Commercial Manual Meat Tenderiser | TurcoBazaar MTS737
Commercial Manual Meat Tenderiser | TurcoBazaar MTS737
This offer ends in:
Days
Hours
Min
Sec
from Save -63%
£231.60
£625.20
Ex Tax: £231.60
  • Stock: In Stock
  • Brand: Zodex
  • Model: MTS737
  • SKU: MTS737
Sold: 0
Views: 1076
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The MTS737 is a manual meat tenderiser that processes cuts up to 175 mm wide using stainless steel blades. It increases marinade absorption and reduces cooking time by mechanically breaking down connective tissue. Used in restaurants, hotels, and catering operations where staff prepare large volumes of red meat and poultry.

Commercial Application

The unit handles pre-service preparation of steaks, chicken breasts, pork chops, and other cuts that require mechanical tenderisation. The manual crank mechanism allows kitchen staff to control feed rate and blade penetration depth based on cut thickness and desired tenderness.

Operators position the meat on the feed plate, turn the handle, and pass the cut through rotating blade drums. The 175 mm cutting width accommodates standard portioned cuts. The process takes 3–5 seconds per piece during volume prep before lunch or dinner service.

Key Operational Advantages

  • Stainless steel blade drums and feed mechanism resist corrosion in wet prep environments
  • 7 kg unit weight allows countertop placement without additional structural support
  • Manual operation eliminates electrical connection requirements in temporary or remote kitchens
  • 175 mm maximum width processes standard portioned steaks and chicken breasts
  • Crank handle design provides operator control over feed speed and blade engagement
  • CE certified for UK and EU commercial kitchen hygiene and safety compliance

Technical Specifications

SpecificationDetails
Model / SKUMTS737
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight7.0 kg (15.4 lbs)

Construction & Build Quality

The frame, blade drums, and feed components use stainless steel construction for corrosion resistance and cleaning protocol compliance. The manual crank assembly operates blade rotation through a geared drive mechanism. All food contact surfaces meet commercial kitchen hygiene standards.

  • Stainless steel blade drums with replaceable cutting edges
  • Geared crank mechanism transfers manual input to blade rotation
  • Removable feed plate and blade assembly for cleaning access
  • Base mounting points for secure countertop installation

Suitable Operations

  • Restaurants
  • Hotels
  • Catering businesses
  • Food trucks
  • Commercial kitchens

Procurement & Support

TurcoBazaar supplies the MTS737 from UK facilities to commercial buyers in Europe, USA, Canada, Middle East, and Africa. The unit ships as a complete assembly with user manual and mounting hardware. Lead time is typically 1–3 working days for stock units.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical specifications, blade replacement schedules, or freight quotation for multiple units. WhatsApp enquiries accepted for operational questions and parts availability.
Contact Our Team

Frequently Asked Questions

Q: Is the MTS737 suitable for high-volume commercial operations?

A: The manual crank design suits medium-volume prep where staff process 50–100 portions per service. Operations requiring continuous high-volume tenderisation may need motorised units. The stainless construction supports daily commercial use and cleaning protocols.

Q: Does this unit require electrical connection?

A: No. The MTS737 operates entirely by manual crank. This makes it suitable for outdoor catering setups, food trucks, or kitchens where electrical capacity is limited.

Q: Do you ship the MTS737 to USA and Canada?

A: Yes. TurcoBazaar ships worldwide including USA, Canada, Europe, Middle East, and Africa. The unit meets CE standards applicable to UK and EU markets, with NSF and CSA equivalency for North American commercial use. Contact for freight quotation on international orders.

Q: Are replacement blades and spare parts available?

A: Yes. TurcoBazaar supplies replacement blade drums, feed mechanism components, and crank assembly parts. Lead times vary by component. Contact with model number for spare parts availability and pricing.

Q: What after-sales support do you provide?

A: TurcoBazaar provides technical guidance on blade sharpening intervals, disassembly for cleaning, and operational troubleshooting. Support covers installation questions, parts identification, and maintenance scheduling for commercial fleet management.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.