Commercial Mobile Work Table Stainless Steel Bottom Shelf 1500x600x900mm | TurcoBazaar WTG600X1500C

Commercial Mobile Work Table Stainless Steel Bottom Shelf 1500x600x900mm | TurcoBazaar WTG600X1500C
Commercial Mobile Work Table Stainless Steel Bottom Shelf 1500x600x900mm | TurcoBazaar WTG600X1500C
This offer ends in:
Days
Hours
Min
Sec
from Save -59%
£180.00
£441.60
Ex Tax: £180.00
  • Stock: In Stock
  • Brand: Zodex
  • Model: WTG600X1500C
  • SKU: WTG600X1500C
Sold: 0
Views: 1147
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The WTG600X1500C is a mobile stainless steel work table with a 1500×600mm footprint and 900mm working height. It carries 305 kg on the top shelf and 230 kg on the galvanized undershelf. Four swivel castors (two locking) enable repositioning during prep shifts or end-of-service cleaning.

Commercial Application

Prep stations in hotel kitchens and high-volume catering operations require mobile surfaces that withstand repeated sanitation cycles. The 1.2mm Type 430 stainless steel top resists corrosion from acidic ingredients and commercial detergents. Mobility allows staff to reconfigure work zones without dismantling fixed benches.

During service, the table supports plating operations or ingredient staging near cooking lines. The undershelf stores bulk containers or reserve stock at arm level. Locking castors stabilise the unit when staff apply knife pressure or operate countertop equipment on the surface.

Key Operational Advantages

  • Top shelf: 305 kg load capacity on 1.2mm Type 430 stainless steel
  • Undershelf: 230 kg capacity, galvanized steel construction
  • Four swivel castors: 100mm diameter, two with foot-operated brakes
  • Square slant front edge prevents trapped food debris
  • Galvanized leg frames and hat channel resist floor-level moisture
  • Flatpack delivery reduces freight volume on international shipments

Technical Specifications

SpecificationDetails
Model / SKUWTG600X1500C
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.

Construction & Build Quality

The work surface uses 1.2mm Type 430 stainless steel with a square slant front edge that sheds liquids and prevents debris accumulation. Leg frames and undershelf structure are galvanized steel. Four 100mm castors mount to galvanized sockets welded to the leg assembly.

  • 1.2mm Type 430 stainless steel top shelf — food-contact compliant
  • Galvanized undershelf and hat channel — moisture-resistant substructure
  • Welded galvanized leg sockets — castor mounting points
  • Flatpack assembly — bolt-together frame, no welding required on site

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies Zodex commercial work tables from UK inventory to kitchens in Europe, North America, the Middle East, and Africa. Flatpack construction reduces international freight costs and allows container consolidation for multi-unit orders. CE certification documentation accompanies shipments to territories requiring third-party compliance records.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for material certifications, bulk order pricing, or freight quotations to your commercial kitchen location. Technical guidance available by telephone or WhatsApp during UK business hours.
Contact Our Team

Frequently Asked Questions

Q: Is the top shelf Type 304 or Type 430 stainless steel?

A: The WTG600X1500C uses 1.2mm Type 430 stainless steel. Type 430 provides adequate corrosion resistance for dry and moist food prep at lower material cost than Type 304. Buyers requiring marine-grade or pharmaceutical specification should request Type 304 as a custom build option.

Q: What is the maximum safe load on the top shelf?

A: The top shelf carries 305 kg when weight distributes evenly across the surface. The galvanized undershelf supports 230 kg. Concentrated point loads — such as single heavy mixers — require distribution plates to prevent localised deck deflection.

Q: Are the legs height-adjustable?

A: The WTG600X1500C has fixed-height legs at 900mm working surface. Zodex offers adjustable-leg models in the same footprint if floor levelling or ergonomic height variance is required. Contact TurcoBazaar for adjustable-leg model specifications and pricing.

Q: Can I add a splashback or upstand?

A: This model ships without a rear splashback. Zodex manufactures bolt-on splashbacks in 100mm, 150mm, and 200mm heights. TurcoBazaar supplies splashback kits separately with mounting hardware and installation instructions.

Q: Do you supply custom widths or depths?

A: Zodex manufactures work tables in modular 100mm increments from 600mm to 2400mm width and 600mm to 800mm depth. Custom sizes require 4–6 week lead time from order confirmation. Minimum order quantities apply to non-standard dimensions — contact TurcoBazaar for feasibility and pricing.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.