
Ask a Question About This Product
This offer ends in:
Single-bowl stainless steel pot wash sink measuring 770x600x900mm with integral upstand and round legs. Used for manual washing of large cookware, prep bowls, and kitchen utensils in commercial operations. Flat-packed for freight efficiency with assembly on site.
Commercial Application
Installed in main wash-up stations or separate pot wash zones where staff handle heavy-duty cookware between service periods. Accommodates stockpots, roasting trays, and mixing bowls up to 610mm width. Bowl depth of 450mm prevents splashing during high-volume washing.
Operators use this unit continuously during post-service breakdown when large-volume cookware returns from production lines. The 100mm integral upstand shields wall surfaces from water contact during scrubbing of burnt-on residue. Round leg design allows floor cleaning beneath the unit.
Key Operational Advantages
- 610x450mm bowl dimensions handle stockpots and full gastronorm pans
- 100mm upstand protects wall surfaces from water spray during manual scrubbing
- Round legs permit floor mop access and comply with sanitation inspections
- Flat-pack delivery reduces freight volume by 60% compared to assembled units
- 89mm drain hole diameter clears food debris without frequent blockages
- ABS bullet feet provide height adjustment on uneven commercial kitchen floors
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | YSA16077201 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
Construction & Build Quality
Fabricated from stainless steel sheet with welded corners and reinforced bowl rim. ABS adjustable bullet feet provide levelling tolerance. All surfaces polished to food-contact grade with coved internal corners for drainage.
- Stainless steel construction throughout — no painted or powder-coated surfaces
- Welded bowl integration prevents water leakage at seams during operation
- Coved internal corners eliminate standing water and bacterial harbourage points
- Adjustable ABS feet compensate for floor irregularities up to 25mm
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial pot wash sinks from UK warehouse to hospitality operations worldwide. Units ship flat-packed to UK mainland addresses, European Union member states, United States, Canada, Middle East territories, and sub-Saharan Africa. Freight quotations provided for multiple-unit orders or remote delivery zones.
Frequently Asked Questions
Q: What grade of stainless steel is used in construction?
A: Material grade depends on production batch — consult technical support for specific grade confirmation prior to purchase. Most commercial sink fabrications use 430-grade stainless steel for structural components.
Q: What load capacity does the bowl structure support?
A: Bowl supports typical commercial cookware loads including water-filled stockpots up to 50 litres. Structure is not rated for standing loads or equipment storage.
Q: Are the legs adjustable for uneven floors?
A: ABS bullet feet adjust vertically to compensate for floor irregularities. Adjustment range typically 20–30mm depending on foot design.
Q: Can the upstand height be modified or removed?
A: The 100mm upstand is welded as integral component and cannot be field-modified. Units without upstands require separate ordering.
Q: Is custom sizing available for specific kitchen layouts?
A: Standard production runs use fixed dimensions. Custom sizing requires manufacturer consultation with minimum order quantities and extended lead times of 8–12 weeks.