









Ask a Question About This Product
This offer ends in:
The PSA12070 is a single-bowl pot wash sink measuring 1200×700×900mm with integrated splashback and square leg construction. It handles large cookware, roasting trays, and bulk utensil washing in commercial kitchens. The unit ships flat-packed at 15 kg and assembles on-site with adjustable feet.
Commercial Application
Installed in dish pit areas or dedicated pot wash stations where manual cleaning of oversized cookware takes place. The 1120mm bowl width accommodates full-size sheet pans, stockpots, and mixing bowls that cannot fit standard three-compartment sinks. The 40mm splashback contains spray runoff during high-pressure rinsing.
Used during post-service cleanup when staff scrub carbonised residue and baked-on food from heavy pans. The 280mm bowl depth provides clearance for submerged soaking of large items. Adjustable feet compensate for uneven floors common in older kitchen buildings.
Key Operational Advantages
- 1120mm internal bowl width accepts full gastronorm 2/1 trays and 600mm paella pans
- 280mm bowl depth allows full immersion of 15-litre stockpots
- Adjustable feet stabilise unit on floors with up to 20mm variance
- 40mm rear splashback prevents water damage to wall surfaces
- Flat-pack shipping reduces freight cost by 60% compared to assembled units
- 15 kg total weight permits two-person installation without lifting equipment
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | PSA12070 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 15.0 kg (33.1 lbs) |
Construction & Build Quality
Full stainless steel construction with welded joints and anti-runoff edge profile. Square leg design provides lateral stability under repeated impact from heavy cookware. All exposed edges are rolled to prevent cuts during manual handling.
- Stainless steel grade suitable for continuous water contact and alkaline detergent exposure
- Welded bowl seams eliminate crevices where bacteria colonise
- Square legs bolt directly to underframe without additional brackets
- 89mm drain opening accepts standard UK commercial waste fittings
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex unit to commercial kitchens across the UK, Europe, USA, Canada, Middle East, and Africa. The flat-pack format reduces international shipping costs and permits container consolidation with other equipment orders. CE certification meets hygiene standards applicable in UK, EU, USA (NSF equivalent), and Canada (CSA equivalent) jurisdictions.
Frequently Asked Questions
Q: What grade of stainless steel is used in the PSA12070?
A: The unit uses food-grade stainless steel appropriate for commercial kitchen wet areas. Specific alloy composition (304 or 430 equivalent) is confirmed at order placement based on destination market requirements.
Q: What is the maximum weight load the sink can support?
A: The welded construction and square leg frame support typical commercial pot wash loads including water-filled 20-litre stockpots. Dynamic load rating is 150 kg distributed across the bowl surface.
Q: Are the legs adjustable and what is the height range?
A: Adjustable feet provide 20mm height compensation to level the unit on uneven floors. Standard installation height is 900mm from floor to bowl rim, measured at maximum foot extension.
Q: Can the splashback height be customised?
A: The standard 40mm splashback is fixed at manufacture. Custom splashback heights require factory special order with minimum quantity of 10 units and 8-week lead time.
Q: Is custom sizing available for narrower kitchen spaces?
A: Custom dimensions are available through Zodex factory orders with 10-unit minimum and 10-week production lead time. Standard widths of 1000mm, 1400mm, and 1600mm are also produced and may have shorter lead times.