





Ask a Question About This Product
This offer ends in:
The PSA14060 is a single-bowl pot wash sink with integrated splashback, fabricated from stainless steel for commercial kitchen use. Overall dimensions are 1400 mm wide, 600 mm deep, 900 mm high. The unit is supplied flat-packed with adjustable feet and weighs 16 kg.
Commercial Application
Pot wash sinks are installed in dishwashing zones to handle cookware, trays, and heavy utensils that do not fit through automatic dishwashers. The single 1320 mm bowl accommodates stock pots, sheet pans, and mixing bowls. Square legs and adjustable feet allow levelling on uneven floors.
The 280 mm bowl depth prevents splashing during high-volume wash cycles. The 40 mm rear splashback protects wall finishes from water spray. Flat-pack delivery reduces freight cost and allows installation through standard doorways.
Key Operational Advantages
- 1320 mm bowl width accommodates full-size gastronorm pans and commercial cookware
- 280 mm bowl depth provides clearance for stock pots and mixing equipment
- Adjustable feet compensate for floor gradients up to 15 mm
- Anti-runoff edge channels water back into bowl during heavy washing
- 89 mm drain hole diameter accepts standard commercial waste fittings
- CE-certified construction meets UK, EU, NSF (USA), and CSA (Canada) hygiene standards
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | PSA14060 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 16.0 kg (35.3 lbs) |
Construction & Build Quality
All wetted surfaces are stainless steel. The bowl, worktop, splashback, and frame are welded or bolted construction. Square-profile legs provide stability under load. Adjustable feet are threaded stainless steel or plastic composite.
- Stainless steel bowl, deck, and splashback — grade 304 or 430 depending on market specification
- Square legs with adjustable feet for floor levelling
- Anti-runoff edge formed into worktop perimeter
- Flat-pack design with bolt-together assembly
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial sinks from UK stock to buyers in the United Kingdom, Europe, North America, the Middle East, and Africa. The PSA14060 ships flat-packed via pallet freight. Lead time is 1–3 working days for UK mainland delivery.
Frequently Asked Questions
Q: What grade of stainless steel is used in the PSA14060?
A: The PSA14060 is manufactured in either 304 or 430 grade stainless steel depending on regional specification. Both grades meet CE, NSF, and CSA food-contact standards. Confirm grade with TurcoBazaar at time of order if your operation requires 304 for chloride-rich environments.
Q: What is the maximum load capacity of the worktop?
A: The worktop is rated for static loads typical of commercial pot washing — stacked wet cookware, full water basins, and cleaning equipment. Dynamic load capacity depends on floor levelling and leg adjustment. Contact TurcoBazaar if your application involves point loads exceeding 50 kg.
Q: Are the feet adjustable and what is the range?
A: Adjustable feet are standard. Adjustment range is approximately 15–20 mm depending on foot design. This allows levelling on floors with minor gradient or surface irregularities.
Q: Can the splashback height be customised?
A: The PSA14060 is supplied with a 40 mm splashback as standard. Custom splashback heights or configurations require factory modification. Contact TurcoBazaar with dimensional requirements for made-to-order quotation.
Q: Is custom sizing available for this sink model?
A: Zodex manufactures sinks in standard and custom dimensions. Lead time for custom sizing is 4–8 weeks depending on specification. Provide required width, depth, bowl count, and splashback height for quotation.