







Ask a Question About This Product
This offer ends in:
The PSD150702D is a single-bowl pot wash sink with integrated splashback and cabinet storage. Designed for commercial kitchens processing heavy cookware, large pots, and bulk prep equipment. Used in hotel kitchens, catering facilities, and high-volume restaurant operations where manual washing of large items is required.
Commercial Application
This unit handles post-service washing of cookware that cannot pass through standard dish machines. The 1350mm bowl accommodates full-size stock pots, hotel pans, and roasting trays. Two-door cabinet storage below provides space for cleaning supplies, drainage hoses, or backup utensils.
Typically installed adjacent to main cooking lines or prep stations. The 100mm splashback protects wall surfaces during high-pressure rinsing. Adjustable feet allow levelling on uneven floors common in older commercial properties.
Key Operational Advantages
- 1350mm bowl width accepts standard 600×400mm gastronorm containers
- 300mm bowl depth handles submerged soaking of large cookware
- 100mm rear splashback prevents water ingress into wall cavities
- Two sliding doors provide 1500mm of accessible storage width
- 50kg assembled weight allows two-person installation without lifting equipment
- Adjustable feet compensate for floor slope up to 25mm
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | PSD150702D |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 50.0 kg (110.2 lbs) |
Construction & Build Quality
Constructed from stainless steel throughout. Cabinet frame, bowl, doors, and splashback are welded and polished for food-contact compliance. Meets CE hygiene standards for commercial food preparation environments.
- Stainless steel bowl with welded corners and polished interior
- Sliding door mechanism with stainless steel track system
- Anti-runoff edge prevents water spillage onto floor
- Flat-pack design reduces freight volume by 40% compared to assembled units
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex unit to commercial buyers across the UK, Europe, USA, Canada, Middle East, and Africa. Freight is calculated based on destination and delivery access. Most UK orders dispatch within 1–3 working days from our distribution network.
Frequently Asked Questions
Q: What grade of stainless steel is used in the bowl and cabinet?
A: The bowl and structural components are manufactured from food-grade stainless steel meeting CE and NSF material standards. Zodex typically uses 304-grade stainless for food-contact surfaces. Verify grade requirements with our team if your facility operates under specific health authority mandates.
Q: What is the load-bearing capacity of the cabinet base?
A: The cabinet floor is rated for 60kg distributed load when unit is installed on level surface with all four feet adjusted. Concentrated point loads should not exceed 30kg. Do not store filled chemical containers exceeding 25 litres per shelf level.
Q: Are the feet adjustable and what is the height range?
A: Four adjustable feet provide height adjustment of approximately 25mm. Standard installation height is 850mm to underside of bowl rim. Total height including splashback is 950mm from floor to top edge.
Q: Can the splashback height be customized or removed?
A: This model ships with a fixed 100mm splashback. Custom splashback heights are available on request for orders of three units or more. Contact our team with your wall protection requirements and we will provide quotation for modification.
Q: Is custom sizing available for narrower or wider installations?
A: Zodex manufactures this series in 1200mm, 1500mm, 1800mm, and 2000mm widths. Bowl depth and cabinet depth remain constant across the range. Lead time for non-stock widths is typically 4–6 weeks from order confirmation.