







Ask a Question About This Product
This offer ends in:
The DPSS600X770 is a single-bowl pot wash sink built for high-volume dishwashing and utensil cleaning in commercial kitchens. Bowl capacity is 610x450x400mm, suitable for large pots, pans, and preparation trays. Operators use it in hotel kitchens, catering facilities, and multi-station restaurant wash areas.
Commercial Application
This unit fits into warewashing workflows where heavy cookware requires manual scrubbing before or after machine washing. The 120mm splashback contains water spray during high-pressure rinsing and brush cleaning. Operators position it near dishwashing machines or as a standalone pre-soak station.
During service, kitchen porters use the deep bowl to submerge stock pots, hotel pans, and roasting trays. The 770mm width allows two-handed scrubbing of large items. Flat-pack delivery reduces freight cost for multi-unit fitouts.
Key Operational Advantages
- 610x450x400mm bowl depth accommodates full-size gastronorm pans
- 120mm splashback reduces water spillage onto floor during heavy rinsing
- Stainless steel construction meets CE, NSF, and CSA hygiene standards
- Plastic bullet feet allow height adjustment on uneven floors
- Flat-pack design reduces shipping volume by 40% compared to welded units
- 18 kg weight permits two-person installation without lifting equipment
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | DPSS600X770 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 18.0 kg (39.7 lbs) |
Construction & Build Quality
The sink is fabricated from commercial-grade stainless steel with TIG-welded seams. Bowl corners are radiused to prevent debris traps. Bullet feet are high-density plastic, adjustable for floor leveling.
- Stainless steel gauge suitable for commercial kitchen wet-area use
- TIG-welded bowl seams for water-tight integrity
- Radiused internal corners for NSF-compliant cleaning access
- Adjustable bullet feet compensate for floor slope up to 15mm
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the DPSS600X770 from UK stock to commercial buyers in Europe, North America, the Middle East, and Africa. Zodex manufactures the unit in Turkey under CE certification. Lead time is 1–3 working days for UK delivery, 5–12 days for international freight depending on destination.
Frequently Asked Questions
Q: What grade of stainless steel is used in the DPSS600X770?
A: The unit is fabricated from commercial-grade stainless steel suitable for wet-area food service use. Exact grade specification (304 or 430) is confirmed at time of order. Both grades meet CE and NSF hygiene standards.
Q: What is the maximum safe load capacity for the sink bowl?
A: The bowl supports up to 80 kg of water and cookware when correctly leveled on all four feet. Uneven loading or missing foot contact reduces capacity. Install on solid flooring, not suspended or raised platforms.
Q: Are the legs height-adjustable?
A: The unit uses plastic bullet feet with screw adjustment, providing approximately 15mm of leveling range. Total installed height is 900mm at standard foot extension. Custom leg extensions are not available for this model.
Q: Can the splashback be removed or modified?
A: The 120mm splashback is welded to the rear of the unit and cannot be removed without structural modification. Buyers requiring no splashback should specify at order. Retrofit removal voids warranty.
Q: Is custom sizing available for multi-bowl configurations?
A: The DPSS600X770 is a single-bowl standard-dimension unit. Custom sizing and multi-bowl layouts require factory quotation with 15-unit minimum order. Lead time for custom fabrication is 8–12 weeks from Turkey.