







Ask a Question About This Product
This offer ends in:
The PSA10070U is a single-bowl stainless steel pot wash sink built for commercial dishwashing and heavy utensil cleaning operations. It measures 1000x700x900mm with integrated backsplash and lower storage shelf. This unit handles large-volume pot and pan washing in hotel kitchens, restaurant prep areas, and catering production facilities.
Commercial Application
Pot wash sinks occupy dedicated wash zones separate from food prep surfaces. The PSA10070U provides 920mm bowl width to accommodate stock pots, sheet pans, and mixing bowls that do not fit standard three-compartment sinks. The 280mm bowl depth allows full submersion of tall cookware without splashing onto adjacent work areas.
During service, this sink processes soiled cookware before items enter mechanical dishwashers or proceed to manual sanitizing compartments. The 40mm rear splashback prevents water damage to wall finishes. The bottom shelf stores cleaning chemicals, scrub brushes, and drain strainers within arm's reach of the operator.
Key Operational Advantages
- 920mm x 580mm bowl dimensions handle full-size gastronorm pans and 40-litre stock pots
- 40mm stainless steel backsplash protects wall surfaces from water spray
- Adjustable square legs accommodate uneven floors and allow drainage routing underneath
- Lower storage shelf holds 15kg of cleaning supplies or sanitizing equipment
- Ships flat-packed at 19kg for reduced freight cost on multi-unit orders
- Meets CE, NSF, and CSA commercial kitchen hygiene standards
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | PSA10070U |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 19.0 kg (41.9 lbs) |
Construction & Build Quality
The PSA10070U uses stainless steel construction throughout the bowl, worktop, backsplash, and frame. Square-profile legs provide lateral stability under load. Adjustable feet compensate for floor irregularities up to 25mm. All joints are TIG-welded and ground smooth to eliminate soil traps.
- Stainless steel bowl, deck, and splashback — no seams or crevices
- Square-section leg frames with welded crossbracing
- Adjustable bullet feet for leveling on uneven floors
- TIG-welded joints ground flush to HACCP standards
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial sinks direct from Turkish manufacturing facilities to UK buyers and international markets. We ship worldwide to the UK, Europe, USA, Canada, Middle East, and Africa. Multi-unit orders qualify for consolidated freight pricing. Lead time is 1–3 working days for stock items.
Frequently Asked Questions
Q: What grade of stainless steel is used in the PSA10070U?
A: The bowl and worktop are food-grade stainless steel suitable for direct food contact and chemical wash solutions. Frame components use commercial-grade stainless steel. All materials meet CE hygiene standards for commercial kitchens.
Q: What is the load-bearing capacity of the bottom shelf?
A: The lower shelf supports up to 15kg of static load when weight is distributed evenly. This accommodates cleaning chemical containers, mop buckets, or stacked utensil storage bins. Concentrated point loads may deform the shelf.
Q: Are the legs adjustable in height?
A: Yes. Each square leg has an adjustable bullet foot with approximately 25mm of height adjustment. This allows leveling on uneven floors and ensures proper drainage toward the bowl outlet.
Q: Can the backsplash height be customized?
A: The standard PSA10070U includes a 40mm rear splashback. For projects requiring taller splashbacks or side panels, contact TurcoBazaar with your specification. Custom fabrication is available on bulk orders with extended lead times.
Q: Does this unit ship fully assembled?
A: No. The PSA10070U ships flat-packed to reduce freight volume and cost. Assembly requires attaching legs to the underside of the bowl deck and installing adjustable feet. No welding or specialized tools are needed.