





Ask a Question About This Product
This offer ends in:
The PSA14070U is a single-bowl pot wash sink with integrated splashback and lower storage shelf. It handles heavy cookware cleaning in commercial kitchens, hotel dish rooms, and central production facilities. Operators use the 1320mm bowl for pots, pans, and large trays that do not fit in standard dishwashers.
Commercial Application
Pot wash sinks serve as the manual cleaning station for oversize cookware and equipment that cannot pass through conveyor or undercounter machines. The PSA14070U provides containment during scrubbing and rinsing of stock pots, sheet pans, mixing bowls, and roasting trays. The lower shelf holds detergent dispensers, brush caddies, and spare drain baskets.
Kitchen porters use the sink during service breakdown and between prep shifts. The 280mm bowl depth accommodates stacked items and reduces splash during high-pressure rinsing. The 40mm splashback protects adjacent wall surfaces from water spray and cleaning chemical contact.
Key Operational Advantages
- 1320mm bowl width accepts sheet pans and stock pots up to 60-litre capacity
- 280mm bowl depth provides clearance for stacked cookware during soak cycles
- 40mm rear splashback contains rinse spray and prevents wall moisture damage
- Lower shelf holds 15 kg of cleaning supplies and accessories within reach
- Adjustable feet compensate for uneven floor surfaces up to 20mm variance
- 89mm drain outlet fits standard commercial waste fittings and grease traps
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | PSA14070U |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 24.0 kg (52.9 lbs) |
Construction & Build Quality
The unit is fabricated from stainless steel with welded corners and a reinforced bowl structure. Square profile legs provide lateral stability under load. The flat-pack design reduces freight volume and allows assembly on site with basic hand tools.
- Stainless steel body resists corrosion from detergents and chlorinated rinse water
- Welded seams eliminate crevices that harbour bacteria and food residue
- Adjustable feet anchor unit and maintain level orientation on sloped floors
- 32mm faucet holes accept commercial deck-mount taps and pre-rinse sprayers
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the PSA14070U to commercial operators in the UK, Europe, USA, Canada, Middle East, and Africa. The unit ships flat-packed to reduce freight costs on international orders. Zodex manufactures the sink to CE standards, with material certifications available for NSF and CSA compliance verification.
Frequently Asked Questions
Q: Is this sink fabricated from 304 or 430 grade stainless steel?
A: The PSA14070U uses stainless steel construction suitable for commercial kitchen environments. Contact TurcoBazaar with your material certification requirements for specific grade confirmation and compliance documentation.
Q: What is the load-bearing capacity of the lower shelf?
A: The lower shelf supports up to 15 kg of cleaning supplies, chemical dispensers, and accessories. Distribute weight evenly across the shelf surface. Do not store heavy equipment or cookware on the lower tier.
Q: Are the legs and shelf height adjustable after installation?
A: The legs adjust vertically to compensate for uneven floors up to 20mm variance. The lower shelf is fixed at the factory-set height. The overall unit height is 900mm from floor to worktop rim.
Q: Can the splashback be removed or replaced if damaged?
A: The 40mm splashback is welded to the bowl structure during fabrication. Replacement splashback sections are available as spare parts. Contact TurcoBazaar for panel replacement instructions and freight costs.
Q: Does TurcoBazaar supply this sink in custom dimensions?
A: The PSA14070U is a standard production model at 1400x700x900mm. Custom-sized pot wash sinks are available on request with minimum order quantities. Lead times for bespoke fabrication are 6-8 weeks from order confirmation.