









Ask a Question About This Product
This offer ends in:
The PSA18060U is a single-bowl pot wash sink built for high-volume commercial dishwashing operations. It measures 1800×600×900mm and ships flat-packed at 34 kg. Kitchen porters use it to process cookware, stock pots, and large utensils in restaurant and hotel back-of-house wash stations.
Commercial Application
The unit sits in dedicated pot wash areas where bulky cookware cannot pass through standard dishwashers. Operators fill the 1720mm-wide bowl with hot water and detergent, scrub items manually, then rinse and stack on adjacent draining surfaces. The 40mm splashback prevents water spray reaching wall surfaces during heavy scrubbing.
During service hours, the sink processes pans, griddle plates, mixing bowls, and roasting trays that accumulate throughout shifts. The 280mm bowl depth accommodates stacked items and keeps water contained during high-pressure rinsing. A bottom shelf stores detergent containers, brushes, and steel wool within arm's reach.
Key Operational Advantages
- 1800mm width handles stock pots and full-size gastronorm pans without tilting
- 280mm bowl depth prevents overflow during submerged scrubbing of burnt carbon deposits
- Adjustable feet compensate for uneven floor surfaces and maintain stable working height
- Bottom shelf adds 1800×600mm storage for cleaning chemicals and utensils
- 40mm rear splashback protects walls from detergent spray and hot water splash
- Flat-pack delivery reduces freight cost on international and long-distance shipments
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | PSA18060U |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 34.0 kg (75.0 lbs) |
Construction & Build Quality
The frame, bowl, and splashback are fabricated from stainless steel sheet. Square-profile legs terminate in adjustable feet for levelling on concrete or tiled floors. All edges feature anti-runoff lips to contain spills during washing operations.
- Stainless steel construction meets CE hygiene standards for food contact surfaces
- Square legs provide lateral stability under load from stacked cookware
- Adjustable feet allow height correction between 890–920mm
- 89mm drain hole accepts standard commercial waste fittings
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the PSA18060U from UK inventory to commercial buyers in Europe, North America, the Middle East, and Africa. The unit ships flat-packed to reduce freight volume on container and pallet shipments. Import documentation and voltage compliance guidance are provided for non-UK destinations.
Frequently Asked Questions
Q: What grade of stainless steel is used in the PSA18060U construction?
A: The manufacturer specifies food-grade stainless steel meeting CE commercial kitchen standards. Exact alloy grade (304 or 430) is confirmed on request for corrosion resistance verification in specific water chemistry conditions.
Q: What is the load-bearing capacity of the bottom shelf?
A: The shelf supports typical storage loads of detergent containers, brushes, and cleaning supplies distributed across the 1800×600mm surface. Concentrated point loads or stacked cookware storage are not recommended.
Q: Are the legs or shelf height adjustable after installation?
A: Adjustable feet provide approximately 30mm of height correction to level the unit on uneven floors. The shelf position is fixed during assembly and cannot be adjusted without disassembly.
Q: Can the splashback be removed or modified for wall-mounted tap installation?
A: The 40mm splashback is a structural component and should not be removed. The unit includes a 32mm tap hole; wall-mounted taps require the hole to be left unused or blanked.
Q: Is custom sizing available for narrower kitchen layouts?
A: The PSA18060U is a fixed-dimension model manufactured in standard production runs. Custom sizing requests are forwarded to the factory for feasibility and lead time assessment on orders of six units or more.