









Ask a Question About This Product
This offer ends in:
The PSA18070U is a single-bowl stainless steel pot wash sink with integrated splashback and bottom shelf. Built for high-volume wash operations in commercial kitchens, hotels, and catering facilities. The 1800mm width accommodates large pots, pans, and trays during continuous service periods.
Commercial Application
Positioned in dishwash areas or back-of-house prep zones to handle manual cleaning of cookware between service runs. The bottom shelf provides immediate access to cleaning chemicals, brushes, and drying cloths. The splashback protects adjacent walls from water splash during heavy scrubbing.
Used throughout service when automated pot washers cannot handle oversized items or when rapid turnaround is required. The 280mm bowl depth allows submersion of stockpots and roasting pans. Adjustable feet enable levelling on uneven kitchen floors.
Key Operational Advantages
- 1800mm x 700mm work surface handles large-format cookware
- 280mm bowl depth accommodates stockpots up to 50 litres
- 40mm splashback with sealed edge prevents water migration to walls
- Bottom shelf carries 15-20 kg of cleaning supplies within arm's reach
- Adjustable square legs compensate for floor variations up to 25mm
- CE-compliant construction meets UK, EU, USA (NSF), and Canada (CSA) hygiene codes
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | PSA18070U |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 37.0 kg (81.6 lbs) |
Construction & Build Quality
Welded stainless steel construction with squared corner joints. The bowl, worktop, and splashback are formed from single-piece sheet to eliminate seams. Square-profile legs attach via bolt-down mounts. Ships flat-packed with assembly hardware.
- Stainless steel throughout — basin, worktop, shelf, legs, splashback
- Anti-runoff edge around perimeter prevents drips onto floor
- 89mm drain hole accepts standard commercial waste fittings
- 32mm tap hole pre-drilled for single-lever or bridge mixer
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial pot wash sinks from UK inventory to buyers in the United Kingdom, European Union, United States, Canada, Middle East, and Africa. The PSA18070U ships flat-packed to reduce freight volume. Assembly instructions and mounting hardware are included.
Frequently Asked Questions
Q: What grade of stainless steel is used in the PSA18070U?
A: Zodex uses Type 304 stainless steel for all wetted surfaces including the bowl, worktop, and splashback. This grade resists corrosion from detergents and acidic cleaning agents. Legs and structural components may use Type 430 where water contact is minimal.
Q: What is the maximum load capacity for the bottom shelf?
A: The lower shelf is rated for 20 kg evenly distributed load. Typical use includes 5-litre detergent containers, brush caddies, and spray bottles. Avoid concentrated point loads above 10 kg in a single spot.
Q: Are the legs height-adjustable?
A: Yes. Each leg incorporates a threaded foot with 25mm adjustment range. This allows levelling on uneven floors and ensures stable drainage gradient toward the waste outlet.
Q: Can the splashback height be customised?
A: The standard unit features a fixed 40mm splashback. Custom splashback heights up to 300mm are available as a factory modification with extended lead time. Contact TurcoBazaar for quotation on bespoke configurations.
Q: Is the sink available in different lengths?
A: Zodex manufactures the PSA series in 1200mm, 1400mm, 1600mm, 1800mm, and 2000mm lengths. All models maintain 700mm depth and 900mm working height. Custom widths require minimum order quantities and 4–6 week production lead time.