



Ask a Question About This Product
This offer ends in:
The RBDU2112 is a recessed bar drainboard with integral backsplash, used to drain glassware and bar tools in commercial beverage service areas. Dimensions are 300x530x760mm with a 13 kg stainless steel body. Installed behind bar counters or in glass washing zones where controlled drainage is required.
Commercial Application
Bar staff place washed glassware inverted on the recessed surface. Water drains through the unit via 25.4mm (1-inch) LPS tubing connected to floor waste. The 80mm backsplash prevents water migration to rear walls or electrical fittings.
Used during continuous bar service where glassware turnover is high. Recessed surface keeps glassware stable while draining. Output capacity is determined by surface area—this model handles moderate-volume bar operations with steady glass rotation.
Key Operational Advantages
- 304 stainless steel body with galvanized leg frames and plastic adjustable feet
- 80mm backsplash prevents water contact with wall surfaces
- 25.4mm LPS drain tubing removes water at commercial flow rates
- Recessed surface holds glassware securely during drainage
- 13 kg unit weight permits countertop or wall-mounted installation
- CE certified for UK, EU, NSF (USA), and CSA (Canada) hygiene standards
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | RBDU2112 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 13.0 kg (28.7 lbs) |
Construction & Build Quality
Body fabricated from 304 stainless steel with galvanized leg structure. Plastic bullet feet provide height adjustment and floor protection. Welded seams and corner joints are food-safe and meet commercial hygiene codes.
- 304 stainless steel—corrosion resistant in wet bar environments
- Galvanized steel leg frames with plastic adjustable feet
- Welded seams prevent water pooling and bacterial growth
- 25.4mm drain outlet compatible with standard LPS waste systems
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex-manufactured bar equipment to the UK, Europe, USA, Canada, Middle East, and Africa. All units ship with 12-month spare parts warranty. Freight is arranged for commercial addresses; residential delivery requires advance coordination.
Frequently Asked Questions
Q: Is this unit 304 or 430 grade stainless steel?
A: The RBDU2112 body is fabricated from 304 stainless steel. Leg frames are galvanized steel with plastic feet.
Q: What is the load-bearing capacity of the recessed surface?
A: Recessed surface supports typical bar glassware loads—approximately 15–20 kg distributed evenly. Concentrated point loads should be avoided.
Q: Are the legs adjustable for uneven floors?
A: Yes. Plastic bullet feet adjust via threaded posts to compensate for floor irregularities up to 20mm.
Q: Can the backsplash height be modified?
A: The 80mm backsplash is welded to the body and cannot be adjusted. Custom backsplash heights require factory specification at time of order.
Q: Is custom sizing available for different bar widths?
A: Yes. Zodex manufactures custom dimensions for project orders with minimum quantities. Lead time is typically 6–8 weeks for bespoke sizing.