





Ask a Question About This Product
This offer ends in:
The RPBDU2524 is a recessed bar drainboard unit with integrated backsplash, measuring 610×640×760mm and weighing 17 kg. It drains glassware and bar tools in commercial bar areas, cocktail stations, and back-of-house wash points. Built from 304 stainless steel with galvanized leg framework and 25.4mm LPS drain outlet.
Commercial Application
Installed behind bar counters or in glass washing zones where wet glassware must drain between service cycles. The recessed drainboard collects rinse water and channels it through perforated stainless steel into the 1-inch drain tube. Prevents pooling on bar surfaces during high-volume service.
Used continuously during bar service when glassware turnover is high. The 180mm backsplash protects wall surfaces from splash during glass placement. Removable perforated tray allows cleaning of the recess without disassembly of the unit.
Key Operational Advantages
- 304 stainless steel construction resists corrosion in wet bar environments
- Recessed drainboard channels water into 25.4mm LPS drain tube
- 180mm backsplash protects wall finish from water contact
- Removable perforated drainboard allows cleaning of recess cavity
- Galvanized leg structure with plastic adjustable feet for uneven floor leveling
- 17 kg weight enables manual positioning without lifting equipment
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | RPBDU2524 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 17.0 kg (37.5 lbs) |
Construction & Build Quality
Frame and drainboard fabricated from 304-grade stainless steel. Legs use galvanized steel tubing with socket-mount plastic bullet feet for height adjustment. The perforated drainboard lifts out for access to the drainage recess and tube connection point.
- 304 stainless steel drainboard and backsplash resist acidic cleaning agents
- Galvanized leg frame provides structural rigidity under wet conditions
- Plastic bullet feet allow leveling on uneven commercial kitchen floors
- 25.4mm LPS drain tubing connects to standard commercial floor drains
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the RPBDU2524 from UK inventory to commercial buyers in the United Kingdom, Europe, North America, Middle East, and Africa. The unit ships disassembled with assembly hardware included. Standard freight applies; units typically dispatch within 1–3 working days of order confirmation.
Frequently Asked Questions
Q: Is the drainboard 304 or 430 stainless steel?
A: The RPBDU2524 uses 304-grade stainless steel for the drainboard, backsplash, and recess surfaces. Legs are galvanized steel with plastic adjustable feet.
Q: What is the maximum load capacity for glassware on the drainboard?
A: Load capacity depends on glassware weight distribution across the perforated surface. Typical bar glassware loads during service are well within the structural limits of the 304 steel frame. Avoid concentrated point loads exceeding 50 kg.
Q: Are the legs height-adjustable?
A: Yes. Plastic bullet feet thread into galvanized leg sockets and adjust approximately 25mm to compensate for uneven floor surfaces. Total unit height is 760mm at nominal setting.
Q: Can the backsplash height be modified or removed?
A: The 180mm backsplash is welded to the drainboard recess and cannot be removed. Custom backsplash heights require factory specification at time of order.
Q: Is custom sizing available for different bar counter depths?
A: Custom dimensions are available through factory order with minimum quantity requirements. Lead time extends 4–6 weeks for non-standard sizes. Contact TurcoBazaar for custom specification inquiry.