



Ask a Question About This Product
- Stock: In Stock
- Model: AMJ488
This unit provides 1000 kg total load capacity across four chrome-plated wire shelves. Each tier supports 250 kg independently. Used in commercial kitchens, hotel back-of-house areas, and catering production facilities for dry goods storage and equipment staging.
Commercial Application
Mobile shelving addresses space efficiency in active prep zones and storage corridors. Castors allow repositioning during service flow or sanitation schedules. Wire construction permits air circulation around stored inventory and facilitates visual stock checks.
Operators use these units to stage bulk dry goods, segregate prep containers, or hold plated items during banquet production. The 1200 mm width accommodates standard gastronorm pans in rows. Height at 1600 mm provides vertical storage without requiring step stools in most facilities.
Key Operational Advantages
- 1000 kg total capacity — 250 kg per shelf — chrome-plated carbon steel wire construction
- Four independently adjustable shelf heights — tool-free assembly with push-fit pole sleeves
- Four heavy-duty castors — two with brakes — unit repositions during sanitation or service reconfiguration
- 1200×450 mm footprint — fits standard prep aisles and walk-in cooler doorways
- Open wire deck — ventilation around stored goods — visual inventory monitoring without unpacking
- Chrome plating resists surface corrosion in humid commercial environments — wipe-clean maintenance
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | AMJ488 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
Construction & Build Quality
Frame uses chrome-plated carbon steel wire with welded cross-bracing at shelf corners. Vertical poles accept shelf clips at 25 mm increments for height adjustment. Castors mount to pressed steel plates welded to pole feet. Chrome finish protects base metal in dry storage conditions but requires periodic inspection in high-humidity zones.
- Chrome-plated carbon steel wire — 6 mm diameter rods at 25 mm spacing
- Welded corner reinforcements at each shelf level — maintains square geometry under asymmetric loads
- Heavy-duty swivel castors — 100 mm diameter — two with foot-operated brake locks
- Tool-free shelf height adjustment — clip-on shelf corners slide along vertical poles
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this unit from UK inventory to commercial operations in the UK, Europe, USA, Canada, Middle East, and Africa. Lead time varies by destination. Freight quotation provided for orders requiring pallet shipment or consolidation with other equipment.
Frequently Asked Questions
Q: What steel grade is used in the wire construction?
A: Frame uses carbon steel with electroplated chrome finish. Not stainless steel. Suitable for dry storage environments. Inspect chrome integrity quarterly in high-humidity zones to prevent rust bleed-through.
Q: Can shelves be repositioned after assembly?
A: Yes. Shelves clip onto vertical poles at 25 mm intervals. Unload shelf, squeeze corner clips, slide to new height, release clips. No tools required. Adjust under load only with two operators to prevent tipping.
Q: Are castor brakes sufficient to prevent movement under full load?
A: Two castors feature foot-operated brake locks. Adequate for stationary storage on level floors. On sloped surfaces or high-traffic aisles, use wheel chocks during loading. Brake mechanisms require monthly inspection for debris accumulation.
Q: Can this unit be used in walk-in coolers or freezers?
A: Not recommended. Chrome plating degrades under sustained sub-zero condensation cycles. For refrigerated storage, specify stainless steel wire shelving with NSF certification. This model suits ambient dry storage only.
Q: What floor surfaces support 1000 kg load without castor damage?
A: Sealed concrete, epoxy-coated floors, and commercial vinyl tile handle the load. Avoid unfinished wood, standard ceramic tile, or asphalt surfaces. Each castor transmits approximately 250 kg at full capacity. Use load-distributing pads if floor integrity is uncertain.