













Ask a Question About This Product
This offer ends in:
The DSA140701DL is a single-bowl stainless steel sink unit with integrated worktop, drawer, and splashback. Measures 1400×700×950mm with bowl positioned left. Used in restaurant prep areas, hotel kitchens, and catering facilities for wash-up and food prep workflows.
Commercial Application
Positioned in dishwashing zones or prep stations where a single deep bowl handles utensil washing, vegetable rinsing, or equipment cleaning. The 450×450×250mm bowl depth accommodates GN1/1 containers and large pots. Right-side worktop provides staging area for clean items or prep materials.
Operates during service for continuous wash cycles and between shifts for equipment breakdown cleaning. The ball-bearing drawer stores cleaning chemicals, utensils, or prep tools within reach. Adjustable feet compensate for uneven floors common in older commercial buildings.
Key Operational Advantages
- Single drawn bowl 450×450×250mm depth — fits GN1/1 containers
- 1400mm total width provides 950mm worktop space right of bowl
- One drawer with ball-bearing slides — stores utensils or cleaning supplies
- 100mm splashback reduces wall moisture in wet prep zones
- Adjustable feet 850-865mm height — compensates for floor irregularities
- 40kg weight — stable under daily use without floor anchoring
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | DSA140701DL |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 40.0 kg (88.2 lbs) |
Construction & Build Quality
All-stainless steel construction with no galvanized components. Reinforced apron under bowl prevents flexing during heavy use. Wave-board design on worktop surface aids drainage and reduces standing water.
- Fully welded stainless steel frame and surfaces
- Reinforced apron under sink bowl for structural rigidity
- Wave-board worktop surface for water drainage
- Bottom shelf adds storage and structural bracing
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the DSA140701DL from UK inventory to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. Zodex manufactures this unit to CE commercial kitchen standards. Ships disassembled for reduced freight cost on single-unit orders.
Frequently Asked Questions
Q: What grade of stainless steel is used in the DSA140701DL?
A: Zodex uses food-grade stainless steel for all contact surfaces and structural components. Grade meets CE commercial kitchen requirements for corrosion resistance and hygiene. Specific grade (304 or 430) available on request from technical support.
Q: What is the load capacity of the worktop surface?
A: Worktop supports typical kitchen equipment loads — mixers, slicers, or stacked containers — without flexing. Reinforced apron and wave-board design distribute weight across the frame. Avoid concentrated point loads exceeding 50kg in single spot.
Q: Are the legs adjustable and what is the height range?
A: Adjustable feet provide 850-865mm working height plus 100mm splashback. Total unit height adjusts 15mm to level on uneven floors. Feet thread into square leg tubes for stability.
Q: Can the splashback be removed or is it welded?
A: The 100mm splashback is welded to the rear of the worktop. Not removable. Prevents water splash onto wall surfaces in wet prep areas.
Q: Is custom sizing available for this sink configuration?
A: TurcoBazaar supplies standard Zodex catalog models only. Custom sizes require direct factory order with minimum quantities. Contact for feasibility and lead time on non-standard dimensions.