





Ask a Question About This Product
This offer ends in:
The ST245BR is a dual-bowl stainless steel sink designed for wash and hygiene operations in commercial kitchens. Measures 1700×600×900mm with two 450×450×280mm bowls positioned right. Includes 100mm backsplash and adjustable feet for installation on uneven surfaces.
Commercial Application
Used in prep zones where simultaneous washing and rinsing operations are required. Right-bowl configuration allows left-hand work surface for food handling before wash. Pre-drilled faucet holes support standard commercial mixing valves.
Handles high-volume dishwashing in restaurants, hotel back-of-house, and catering production lines. 1700mm length accommodates stacking of dirty service ware during peak hours. Anti-runoff edge prevents floor contamination during continuous use.
Key Operational Advantages
- Full stainless steel construction — no galvanised parts subject to corrosion
- Two 450mm square bowls each 280mm deep for separated wash/rinse cycles
- 100mm backsplash protects wall surfaces from water damage
- Adjustable feet compensate for floor unevenness up to 20mm
- CE-compliant for UK and EU commercial kitchen hygiene standards
- 23kg weight supports stable installation without floor reinforcement
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | ST245BR |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 23.0 kg (50.7 lbs) |
Construction & Build Quality
Constructed from food-grade stainless steel throughout. Bowl joints are welded and polished to prevent bacterial harbourage. Frame and legs are stainless steel — no painted or galvanised components that degrade under continuous wet use.
- Food-grade stainless steel bowls and work surface
- Welded and polished seams for NSF-type hygiene compliance
- Stainless steel leg assembly with threaded height adjustment
- Anti-runoff edge formed into perimeter to contain spillage
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial sinks to UK, European, North American, Middle Eastern, and African buyers. CE certification supports compliance in UK and EU installations. NSF and CSA equivalence documented for USA and Canada shipments.
Frequently Asked Questions
Q: What grade of stainless steel is used in the ST245BR?
A: Food-grade stainless steel is used throughout. Zodex typically specifies 304 grade for bowl and work surfaces. Frame components may be 430 grade depending on production batch.
Q: What is the load-bearing capacity of the work surface?
A: Work surface supports typical loads of stacked dishware and utensils during service. Not rated for heavy appliance placement. Distributed loads up to 50kg are handled safely with adjustable feet properly set.
Q: Can the adjustable legs be replaced with casters?
A: Adjustable feet are threaded M12 standard. Replacement with threaded casters is possible if load rating and hygiene standards are maintained. TurcoBazaar can supply compatible stainless steel casters on request.
Q: Is custom sizing available for the ST245BR configuration?
A: Custom dimensions are not offered on the ST245BR stock model. Zodex manufactures bespoke sink units for orders of 10+ units. Lead time extends to 8-12 weeks for custom production.
Q: Does the 100mm backsplash meet UK Building Regulations for commercial kitchens?
A: 100mm backsplash is standard for splash containment. UK Building Regulations do not specify minimum height. Local Environmental Health Officers may require higher splash protection depending on use and proximity to food prep zones.