



Ask a Question About This Product
This offer ends in:
The VS106BT is a double-bowl stainless steel sink unit with integrated bottom shelf and splashback. It provides 1000mm of working length for high-volume washing operations in commercial kitchens. Bowl dimensions are 400mm × 400mm × 250mm depth per compartment.
Commercial Application
Two-bowl configuration allows separation of washing and rinsing cycles without cross-contamination. The 600mm depth provides sufficient draining space on both sides of the bowls. Bottom shelf stores detergents, sanitisers, and washing equipment within reach.
Used during prep wash-down, utensil cleaning between service periods, and end-of-shift deep cleaning. The splashback prevents water migration to wall surfaces during high-volume washing. Adjustable feet accommodate uneven floor surfaces and meet hygiene gap requirements.
Key Operational Advantages
- 304 AISI stainless steel worktop and bowl construction with Scotch Brite finish
- 40mm × 40mm square stainless steel legs with adjustable feet for floor levelling
- Two 400mm × 400mm bowls with 250mm depth for simultaneous wash and rinse operations
- Integrated undershelf for chemical storage and equipment access
- Upturned edges and splashback prevent water transfer to surrounding surfaces
- CE certified for UK/EU commercial hygiene standards; meets NSF and CSA requirements
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VS106BT |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 24.0 kg (52.9 lbs) |
Construction & Build Quality
Top surface and bowls are 304 AISI stainless steel. Structural legs are 40mm × 40mm 304 stainless with no galvanised components. Scotch Brite finish provides non-reflective surface that resists visible scratching during daily use.
- 304 AISI stainless steel throughout — no galvanised parts in food contact areas
- Scotch Brite finish for scratch resistance and hygiene compliance
- 40mm × 40mm square leg profile with adjustable feet
- Under-panel and upturned edges for spill containment
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial sink units to operations in the UK, Europe, North America, Middle East, and Africa. The VS106BT ships flat-packed for assembly on site. Standard freight options available for single or multiple units.
Frequently Asked Questions
Q: Is the VS106BT constructed from 304 or 430 grade stainless steel?
A: Worktop and bowls are 304 AISI stainless steel. Structural legs are also 304 stainless. No 430 grade or galvanised steel is used in this unit.
Q: What is the load-bearing capacity of the bottom shelf?
A: The undershelf supports up to 20kg of evenly distributed weight. Sufficient for detergent containers, spray bottles, and small cleaning equipment. Heavier items should be stored at floor level.
Q: Are the legs adjustable for uneven floors?
A: Yes. Adjustable feet provide approximately 40mm of height adjustment per leg. This accommodates minor floor gradients and maintains required hygiene gap beneath the unit.
Q: Can the splashback be removed if not required?
A: The splashback is an integrated component of this model. It cannot be removed without structural modification. Contact TurcoBazaar if you require a unit without splashback.
Q: Is custom sizing available for narrower or wider configurations?
A: The VS106BT is a standard 1000mm width model. Custom sizing is not available for this product line. Zodex manufactures other widths in the same series — contact for alternative dimensions.