



Ask a Question About This Product
This offer ends in:
The THSTR147BM2 is a twin-bowl stainless steel sink unit built for medium-volume commercial wash operations. It measures 1400 mm wide by 700 mm deep with two 500×600 mm bowls at 300 mm depth. The unit includes bottom shelf storage and integrated splashback for hygiene compliance in restaurant, hotel, and catering kitchens.
Commercial Application
This sink unit serves dedicated wash zones in commercial kitchens where pots, pans, utensils, and prep equipment require manual cleaning between service cycles. The twin-bowl layout supports a wash-rinse workflow, with one bowl designated for detergent wash and the second for rinse cycles. Bottom shelf storage holds cleaning chemicals, brushes, and drainage equipment within operator reach.
During service, the 1400 mm width accommodates large stock pots and sheet pans without obstructing adjacent workspace. The 700 mm depth provides elbow room for sustained manual scrubbing tasks. Bowl volume and drain capacity determine throughput during peak dishwashing loads in mid-sized operations running 150–300 covers per shift.
Key Operational Advantages
- Two 500×600×300 mm bowls handle pots, pans, and utensils up to 18 litres per bowl capacity
- 304 AISI stainless steel worktop and 40×40 mm square legs resist corrosion in wet environments
- Adjustable feet accommodate uneven floor surfaces and level the unit to 900 mm working height
- Bottom shelf in stainless steel stores cleaning supplies and drainage equipment below worktop level
- Integrated splashback panel protects wall surfaces from water spray during manual washing
- Scotch Brite finish on contact surfaces supports daily chemical cleaning and sanitiser cycles
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THSTR147BM2 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 36.0 kg (79.4 lbs) |
Construction & Build Quality
Worktop, bowls, legs, and shelf are fabricated from 304 AISI stainless steel with Scotch Brite finish. The 40×40 mm square-profile legs provide structural support for loaded bowls and worktop-mounted faucets. Adjustable feet level the unit on uneven floors and maintain 900 mm working height across the installation footprint.
- 304 AISI stainless steel construction resists chloride corrosion from detergents and sanitisers
- Scotch Brite surface finish conceals minor scratches and maintains appearance under daily use
- 40×40 mm square legs support loaded bowls and resist lateral movement during manual scrubbing
- Welded joints and upturned edges prevent water pooling and bacterial growth in crevices
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial sinks to buyers in the UK, Europe, USA, Canada, Middle East, and Africa. The THSTR147BM2 ships disassembled with leg assembly and plumbing hardware packed separately. Freight quotations for pallet shipments are calculated based on destination postcode and quantity ordered.
Frequently Asked Questions
Q: Is the worktop 304 or 430 grade stainless steel?
A: The worktop, bowls, and legs are fabricated from 304 AISI stainless steel. This grade resists corrosion from detergents, sanitisers, and chloride exposure common in commercial dishwashing areas. The 430 grade is not used in any contact surfaces.
Q: What load capacity can the worktop and shelf support?
A: The 40×40 mm square legs and welded frame support typical dishwashing loads including filled bowls, mounted faucets, and stored cleaning equipment. Bottom shelf capacity accommodates detergent containers, brushes, and drainage tools up to 25 kg distributed load. Specific point-load ratings require consultation with technical support.
Q: Are the legs adjustable for uneven floors?
A: Yes. Adjustable feet on all four legs level the unit on uneven surfaces and compensate for floor slope. Adjustment range is approximately 20–30 mm per foot. This maintains the 900 mm working height and prevents water pooling due to tilt.
Q: Can the splashback height be customised?
A: The standard splashback is welded to the rear worktop edge at factory-set height. Custom splashback dimensions require consultation before order placement. Lead times for modified units vary based on production schedule.
Q: Is custom sizing available for narrower spaces?
A: Custom widths and depths are available on request for projects requiring non-standard dimensions. Minimum order quantities and extended lead times apply to bespoke fabrication. Contact TurcoBazaar with site measurements for quotation.