





Ask a Question About This Product
This offer ends in:
This 1600mm two-bowl sink unit provides dedicated washing and rinsing capacity for medium to high-volume commercial kitchens. Two 500mm×400mm×250mm bowls are positioned on the left side with a bottom shelf for detergent storage and a rear splashback for wall protection. The unit operates in hotel prep areas, restaurant wash zones, catering facilities, and food processing operations where separate wash/rinse cycles are required.
Commercial Application
The dual-bowl configuration separates contaminated wash water from clean rinse water, meeting hygiene protocols in food service operations. Kitchen staff use the left-side bowls for sequential cleaning of utensils, cookware, and food contact surfaces while the right counter space accommodates drying racks or prep tasks between service periods.
During peak service hours, the 1600mm length supports continuous workflow without bottlenecks. One operator can wash in the first bowl, rinse in the second, and stack clean items on the counter area simultaneously, maintaining throughput in busy commercial environments.
Key Operational Advantages
- 1600mm overall width with 700mm depth provides 1.12m² of total workspace including bowl and counter areas
- Two 500mm×400mm×250mm bowls deliver 50 litres capacity each for separate wash and rinse operations
- 304 AISI stainless steel construction throughout — 40mm×40mm square legs, no galvanised components
- Bottom shelf positioned 150mm above floor level for chemical storage and cleaning supplies
- Rear splashback extends 100mm above counter to protect wall surfaces from water spray
- Adjustable feet compensate for uneven floor surfaces up to 25mm variance
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THSTR167BL2 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 38.0 kg (83.8 lbs) |
Construction & Build Quality
The entire unit is fabricated from 304 AISI stainless steel with Scotch Brite finish for corrosion resistance and cleanability. Square 40mm×40mm legs provide structural support for the 38kg frame plus operational loads. Underside panels and upturned edges prevent water pooling and facilitate drain-down during cleaning cycles.
- 304 AISI stainless steel frame, legs, and bowls — no mild steel or galvanised parts
- Scotch Brite brushed finish reduces visible water spots and fingerprints between cleanings
- Welded construction at bowl-to-counter joints eliminates gaps where food debris accumulates
- Adjustable feet allow height correction from 900mm standard to 925mm maximum
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex sink unit from UK stock for delivery to commercial kitchens in the UK, Europe, USA, Canada, Middle East, and Africa. The unit ships partially disassembled to reduce freight volume — legs and shelf attach on-site with provided hardware. Freight quotes for international orders account for the 38kg shipping weight and 1600mm×700mm×900mm packed dimensions.
Frequently Asked Questions
Q: What grade of stainless steel is used in the frame and bowls?
A: The entire unit is constructed from 304 AISI stainless steel including frame, legs, bowls, shelf, and splashback. No 430-grade or galvanised steel components are used in any part of the assembly.
Q: What is the load-bearing capacity of the bottom shelf?
A: The bottom shelf supports up to 25kg of evenly distributed load for detergent containers, cleaning chemicals, and spare utensils. Concentrated point loads above 10kg may cause shelf deflection and are not recommended.
Q: Are the legs adjustable for uneven floors?
A: Yes. Each of the four 40mm×40mm square legs has an adjustable foot with 25mm height correction range. This allows the unit to be levelled on floors with up to 25mm variation across the 1600mm length.
Q: Can the splashback be removed if wall-mounting is not required?
A: The splashback is welded to the rear edge of the counter as a structural component and cannot be removed. For installations where no splashback is needed, contact TurcoBazaar for availability of the THSTR167BL model without rear panel.
Q: Is custom sizing available for narrower or wider installations?
A: Standard production is 1600mm width only. Custom widths from 1200mm to 2000mm are available as special orders with 4-6 week lead time and minimum order quantities. Contact TurcoBazaar technical team with required dimensions for quotation.