





Ask a Question About This Product
This offer ends in:
The VS186LBT is a dual-bowl stainless steel sink unit measuring 1800mm wide by 600mm deep, built for high-volume commercial wash operations. It combines two 500mm×400mm×250mm deep bowls with integrated bottom shelf and rear splashback. Weighs 51 kg and ships in kit form for on-site assembly.
Commercial Application
This configuration handles prep and wash workflows in restaurants, hotels, and catering units where separate wash and rinse zones are required. The left-side bowl layout allows right-hand draining onto adjacent work surfaces. Bottom shelf stores cleaning chemicals, spray bottles, and spare drainage baskets within reach.
During service, staff use the dual-bowl setup to segregate vegetable wash from utensil cleaning or to maintain separate soak and rinse cycles. Each bowl holds approximately 50 litres. The 100mm splashback reduces wall spray in high-traffic wash areas.
Key Operational Advantages
- 1800mm×600mm footprint with two 500mm×400mm bowls, each 250mm deep
- 304 AISI stainless steel worktop and 40mm×40mm square leg frame — no galvanised components
- Adjustable feet accommodate uneven floors; bottom shelf rated for 20 kg distributed load
- Scotch Brite finish resists visible fingerprints and simplifies end-of-shift cleaning
- Rear splashback integrated into frame structure — no separate wall fixing required
- 51 kg total weight; ships flat-pack with bolt-together assembly in under 60 minutes
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VS186LBT |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 51.0 kg (112.4 lbs) |
Construction & Build Quality
Worktop and bowl fabrication use 304 AISI stainless steel, TIG-welded at seams. Leg frame comprises 40mm×40mm square-section 304 stainless tubing with threaded adjustable feet for levelling. Under-panel reinforcement and upturned edges prevent water pooling at joins.
- 304 AISI stainless on all food-contact and structural surfaces
- Square 40mm×40mm leg frame with adjustable levelling feet
- TIG-welded bowl seams and integrated splashback
- Scotch Brite surface finish for cleanability
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial sinks direct from Turkish manufacturing to the UK, with onward freight to Europe, North America, the Middle East, and Africa. The VS186LBT ships on standard pallet; dimension and weight data provided for freight quotation. CE certification covers UK and EU hygiene standards; NSF and CSA equivalence confirmed for North American installations.
Frequently Asked Questions
Q: Is the worktop 304 or 430 stainless steel?
A: The worktop, bowls, and leg frame use 304 AISI stainless steel. No galvanised or 430-grade components are present in the structure. Certification documentation ships with the unit.
Q: What is the load-bearing capacity of the bottom shelf?
A: The bottom shelf supports up to 20 kg of evenly distributed weight. Store cleaning supplies, spray bottles, or small equipment bins. Do not stack heavy pots or bulk liquid containers.
Q: Are the legs adjustable for uneven floors?
A: Each leg has a threaded adjustable foot with approximately 30mm height range. This compensates for minor floor irregularities and allows levelling with a spirit level during installation.
Q: Can the splashback height be customised?
A: The standard unit includes a 100mm rear splashback welded to the frame. Custom splashback height or side splashbacks require factory specification at order time. Contact TurcoBazaar for modification lead times.
Q: Is custom sizing available for tighter kitchen layouts?
A: Zodex manufactures custom widths, depths, and bowl configurations to order. Minimum order quantities and extended lead times apply. Provide floor plan dimensions and workflow requirements for quotation.