





Ask a Question About This Product
This offer ends in:
The THSTR166BR2 is a 1600mm twin-bowl stainless steel sink unit with integrated splashback and bottom shelf. Designed for commercial dishwashing and food prep hygiene workflows in hotel kitchens, restaurant wash-up areas, and catering production facilities. Two 500mm x 400mm bowls provide separate zones for washing and rinsing at 40kg installed weight.
Commercial Application
Twin-bowl configuration supports segregated washing protocols required in food safety management systems. Right-hand bowl placement suits right-dominant workflow layouts common in UK and European commercial kitchens. Bottom shelf stores cleaning chemicals, sanitizers, or dishwashing supplies within arm's reach of the operator.
Deployed in dishwashing zones, vegetable prep wash stations, or pot-wash areas. 1600mm length accommodates high-volume service periods where continuous washing is required. Splashback contains water spray during manual washing or when using pre-rinse spray units.
Key Operational Advantages
- 304 AISI stainless steel worktop and bowls — food-contact grade material
- Two 500mm x 400mm bowls, 250mm deep — separate wash and rinse zones
- 40mm square stainless steel legs with adjustable feet — level installation on uneven floors
- Integrated splashback and bottom shelf — single-unit hygiene solution
- CE certified for UK/EU commercial kitchen hygiene standards
- Scotch Brite finish — non-reflective, scratch-resistant surface
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THSTR166BR2 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 40.0 kg (88.2 lbs) |
Construction & Build Quality
Worktop fabricated from 304 AISI stainless steel with Scotch Brite finish for cleanability and durability. Structural frame uses 40mm square-section stainless steel legs with adjustable feet for floor-level compensation. All components are stainless steel construction with no galvanized or painted parts that degrade in wet environments.
- 304 AISI stainless steel throughout — no galvanized components
- 40mm x 40mm square-section legs — rigid frame structure
- Adjustable feet — compensate for uneven floor surfaces
- Upturned edges and undershelf — contain spills and provide storage
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial sink units to buyers in the UK, Europe, USA, Canada, Middle East, and Africa. The THSTR166BR2 ships disassembled with assembly hardware included. Freight quotations provided for multi-unit orders or international destinations outside standard shipping zones.
Frequently Asked Questions
Q: What grade of stainless steel is used in the THSTR166BR2?
A: Worktop and bowls are 304 AISI stainless steel. Legs and frame are also 304 AISI stainless steel. No galvanized or 430-grade components are used in this unit.
Q: What is the load-bearing capacity of the bottom shelf?
A: Bottom shelf supports cleaning chemical containers, dishwashing supplies, and standard kitchen smallwares. Zodex does not publish a specific load rating, but construction supports typical commercial kitchen storage loads when weight is distributed evenly.
Q: Are the legs adjustable for uneven floors?
A: Yes. Adjustable feet allow height compensation for floor-level variations. Standard adjustment range suits most commercial kitchen installations.
Q: Can the splashback be removed or is it fixed?
A: Splashback is integrated into the unit structure. It ships as part of the disassembled frame and attaches during installation. Removal would compromise structural integrity.
Q: Is custom sizing available for different kitchen layouts?
A: The THSTR166BR2 is a standard 1600mm production model. Custom sizing requires factory inquiry with lead time and minimum order quantities. Contact TurcoBazaar for custom specification requests.