





Ask a Question About This Product
This offer ends in:
The VS166RBT is a dual-bowl stainless steel sink unit measuring 1600mm wide by 600mm deep, designed for high-volume washing and prep in commercial kitchens. Two 500mm bowls are positioned on the right, each 400mm deep and 250mm high. The unit includes a bottom shelf and rear splashback for hygiene compliance.
Commercial Application
Dual-bowl configuration supports concurrent washing and rinsing operations during service. Right-side bowl placement allows left-hand prep space for incoming items. Bottom shelf stores chemical dispensers, drain baskets, or cleaning tools within arm's reach.
Used in dishwashing areas, prep zones, and back-of-house washing stations. 1600mm width accommodates large roasting trays, mixing bowls, and sheet pans. Splashback prevents water migration to walls and electrical zones.
Key Operational Advantages
- 304 AISI stainless steel worktop and bowl construction — no galvanised components
- 40x40mm square legs in 304 AISI with adjustable feet for uneven floors
- Two 500mm x 400mm x 250mm bowls — 25-litre capacity each
- Under-panel and upturned edges prevent water pooling and floor contamination
- Scotch Brite finish — non-directional grain resists visible scratching
- CE certified for UK, EU, NSF (USA), CSA (Canada) hygiene compliance
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VS166RBT |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 40.0 kg (88.2 lbs) |
Construction & Build Quality
Worktop, bowls, legs, and framework fabricated from 304 AISI stainless steel. Scotch Brite finish applied to all visible surfaces for cleanability. Adjustable feet compensate for floor slope up to 15mm. Under-panel bracing prevents bowl flex under load.
- 304 AISI stainless steel throughout — corrosion-resistant in chlorinated wash environments
- 40kg unit weight — welded framework withstands daily service impact
- Ships disassembled — leg and shelf assembly required on-site
- Rear splashback welded to worktop — eliminates gap for debris accumulation
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial sinks to the UK, Europe, USA, Canada, Middle East, and Africa. Units ship from UK warehouse stock. Freight quotations available for multi-unit orders or international delivery.
Frequently Asked Questions
Q: Is the worktop 304 or 430 grade stainless steel?
A: The VS166RBT worktop and bowls are 304 AISI stainless steel. Legs and framework are also 304 AISI. No 430 grade or galvanised components are used.
Q: What is the maximum load capacity for the bottom shelf?
A: The bottom shelf is rated for 20kg distributed load. Suitable for chemical bottles, cleaning tools, and drain baskets. Do not store heavy equipment or stacked cookware.
Q: Are the legs height-adjustable?
A: Adjustable feet provide 15mm vertical range per leg. Standard installation height is 900mm from floor to worktop. Legs are welded 40x40mm square profile.
Q: Can the splashback be removed or is it welded?
A: The rear splashback is welded to the worktop during fabrication. It cannot be removed. Height is typically 150mm above worktop level.
Q: Does the unit ship assembled or flat-pack?
A: Ships disassembled to reduce freight volume. Legs, shelf, and bowls require on-site assembly. No welding needed — bolt-together construction with included hardware.