



Ask a Question About This Product
This offer ends in:
The VSC147RBT is a dual-bowl stainless steel sink unit with enclosed cupboard storage, measuring 1400mm wide by 700mm deep. It provides wash capacity and lockable storage in commercial kitchens, hotel prep zones, and catering production lines. Operators use it for ingredient cleaning, utensil washing, and hygiene-controlled workflow in food service environments.
Commercial Application
The unit combines two 400mm bowls with cabinet storage below the work surface. Kitchen staff wash produce, rinse equipment, and store cleaning supplies or smallwares behind closed doors. The right-side splashback protects adjacent walls during high-volume washing periods.
During prep shifts, cooks stage raw ingredients in one bowl while rinsing processed items in the other. The 700mm depth accommodates large mixing bowls and stock pots. Cabinet doors keep detergents and brushes out of sight during health inspections.
Key Operational Advantages
- Two 400×400×300mm deep bowls handle simultaneous washing tasks
- 1400×700mm footprint provides usable counter space beside bowls
- 304 AISI stainless steel worktop resists corrosion in wet environments
- 40×40mm square legs with adjustable feet compensate for uneven floors
- Enclosed cupboard with two doors stores up to 25kg of supplies per shelf
- Right splashback prevents water spray on adjacent equipment or walls
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VSC147RBT |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 51.0 kg (112.4 lbs) |
Construction & Build Quality
The frame uses 304 AISI stainless steel throughout—worktop, legs, bowl panels, and cabinet doors. No galvanised components contact food or water. Scotch Brite finish reduces visible scratching and simplifies daily cleaning. Upturned edges and under-panel construction prevent moisture pooling beneath the unit.
- 304 AISI stainless steel in all wetted and structural components
- 40×40mm square leg profiles support 51kg unit weight plus operational load
- Scotch Brite surface finish complies with cleanability standards
- Adjustable feet allow levelling on floors with ±15mm variation
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the VSC147RBT from UK inventory to commercial buyers in Europe, North America, the Middle East, and Africa. Zodex manufactures the unit in Turkey under CE certification for hygiene compliance. Freight quotations include crating for international shipment of the 51kg assembled unit.
Frequently Asked Questions
Q: Is the worktop 304 or 430 grade stainless steel?
A: The worktop, bowls, and legs use 304 AISI stainless steel. Cabinet panels and splashback also use 304 grade. No 430 or galvanised steel appears in the construction.
Q: What load can the cabinet shelves support?
A: Each internal shelf bears approximately 25kg evenly distributed. The unit's 40×40mm leg structure supports the cabinet, worktop, and operational loads without additional bracing.
Q: Are the legs and feet adjustable for uneven floors?
A: Adjustable feet at each leg corner compensate for floor variation up to 15mm. Operators level the unit with a spanner after positioning it in the installation space.
Q: Can the splashback be specified on the left side instead?
A: This model ships with the splashback on the right side of the bowl section. Left-side or rear splashback configurations require quoting alternative Zodex models during order.
Q: Is the unit supplied assembled or flat-packed?
A: The VSC147RBT ships fully assembled at 51kg crated weight. Operators remove protective wrapping and connect waste plumbing without further assembly steps.