Commercial Stainless Steel Mop Sink with High Rack & 2-in-1 Mop Holder 1200x600x550mm | TurcoBazaar SMSJYHR12060

Q: What grade of stainless steel is used in the SMSJYHR12060?

A: The unit is fabricated from SUS201 stainless steel with 0.8mm wall thickness. This grade is specified for wet janitorial environments where food contact is not required. Basin and frame use the same material throughout.

Q: What is the load capacity of the elevated mop rack?

A: The rack frame supports up to 15kg distributed load when properly assembled and anchored to the basin. This accommodates four standard commercial mop heads with handles. Concentrated point loads exceeding 8kg at any single attachment may cause frame deformation.

Q: Can the unit be fitted with adjustable height legs?

A: The standard model ships with fixed-height construction at 550mm basin depth. Adjustable leg kits are not available from Zodex for this model. Facilities requiring different working heights should specify requirements before ordering for custom fabrication quotation.

Q: Does the sink include a splash-back panel?

A: No splash-back is included in the standard SMSJYHR12060 configuration. The elevated rack frame provides structural support but does not prevent wall splash. Facilities requiring splash protection should install separate wall-mounted panels or specify requirements for custom fabrication.

Q: Is custom sizing available for narrower janitorial alcoves?

A: TurcoBazaar can request custom dimensions from Zodex for orders of three or more units. Minimum width is 900mm to maintain structural integrity of the rack frame. Lead time extends by 6-8 weeks for non-standard fabrication and minimum order value applies.