Commercial Stainless Steel Mop Sink with High Rack & 2-in-1 Mop Holder 600x600x550mm | TurcoBazaar SMSJYHR6060

Q: What grade of stainless steel is used in the SMSJYHR6060 basin?

A: Basin and rack fabricated from SUS201 austenitic stainless steel at 0.8mm thickness. SUS201 contains 16-18% chromium and 3.5-5.5% nickel for corrosion resistance in wet cleaning environments. Not suitable for direct food contact use.

Q: What is the load-bearing capacity of the high rack frame?

A: Rack frame supports up to 12kg distributed load across horizontal rails. Typical load includes 4-6 wet mop heads at 1.5-2kg each. Concentrated point loads above 8kg may cause tube deformation.

Q: Can the legs be adjusted for uneven floor surfaces?

A: Four adjustable feet provide 15mm height compensation range. Feet threads are M10 x 1.5 pitch with 40mm diameter contact pads. Lock nuts secure final height adjustment during installation.

Q: Does the unit include splash-back panels or rear wall protection?

A: No integrated splash-back supplied with standard SMSJYHR6060 configuration. Basin rim sits 550mm above floor level without rear guard. Wall-mounted splash panels must be specified separately for installations requiring barrier protection.

Q: Is custom sizing available for tighter service corridor installations?

A: SMSJYHR6060 ships as fixed 600x600mm footprint in flat-pack format. Custom basin dimensions require minimum order quantities of 20 units with 8-10 week manufacturing lead time. Contact TurcoBazaar for bespoke sizing quotation and tooling costs.