Commercial Stainless Steel Mop Sink with Low Rack & 2-in-1 Mop Holder 800x600x550mm | TurcoBazaar SMSJYLR8060

Q: What grade of stainless steel is used in the basin construction?

A: The basin uses SUS201 stainless steel with 0.8mm wall thickness. This grade resists corrosion from alkaline floor cleaners and chlorine-based sanitizers used in commercial kitchens. Basin welds are ground smooth to prevent bacterial accumulation in seams.

Q: What is the maximum load capacity of the low rack frame?

A: The rack frame supports up to 12kg distributed load including mop bucket, squeegees, and stored cleaning equipment. Frame brackets attach to basin underside at four reinforced points. Concentrated loads above 12kg may deform horizontal supports.

Q: Does the unit include adjustable legs for uneven floor surfaces?

A: This model ships with fixed-height low rack frame positioning the basin at 550mm. Adjustable feet are not included. Buyers requiring level installation on uneven floors should specify shim requirements during order.

Q: Can a splash-back panel be fitted to the basin rear edge?

A: The basin design accommodates wall-mount installation with customer-supplied splash-back. No factory splash-back option is available for this model. Basin rear edge sits flush against wall surface when installed per specification.

Q: Are custom basin dimensions available for specific facility layouts?

A: This unit ships as 800x600x550mm standard configuration only. Custom sizing requires minimum order quantities of 20 units with 8-week lead time from Turkish manufacturing facility. Contact for volume custom specification.