Commercial Stainless Steel Sliding Door Work Table Cabinet 1600x600x850mm | TurcoBazaar QNH318

Commercial Stainless Steel Sliding Door Work Table Cabinet 1600x600x850mm | TurcoBazaar QNH318
Commercial Stainless Steel Sliding Door Work Table Cabinet 1600x600x850mm | TurcoBazaar QNH318
3-4 Weeks
Commercial Stainless Steel Sliding Door Work Table Cabinet 1600x600x850mm | TurcoBazaar QNH318
Commercial Stainless Steel Sliding Door Work Table Cabinet 1600x600x850mm | TurcoBazaar QNH318
Commercial Stainless Steel Sliding Door Work Table Cabinet 1600x600x850mm | TurcoBazaar QNH318
This offer ends in:
Days
Hours
Min
Sec
from Save -60%
£280.80
£700.80
Ex Tax: £280.80
  • Stock: 3-4 Weeks
  • Brand: Zodex
  • Model: QNH318
  • SKU: QNH318
Sold: 0
Views: 746
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The QNH318 is a stainless steel work table with enclosed sliding door cabinet storage measuring 1600x600x850mm. It provides a food-safe preparation surface and enclosed storage in a single footprint. Used in commercial kitchens, hotel prep areas, and catering facilities where floor space and hygiene compliance are controlled variables.

Commercial Application

The unit combines work surface and enclosed storage in operations where ingredients, utensils, or equipment must remain accessible but concealed. Sliding doors eliminate the swing clearance required by hinged cabinets. This reduces aisle width requirements in tight prep zones.

Deployed during mise-en-place and service prep when multiple stations operate in parallel. The 1600mm width accommodates two operators working from opposite ends. Internal storage keeps cleaning chemicals, spare utensils, or backup stock within arm's reach without occupying separate shelving.

Key Operational Advantages

  • 1600x600mm work surface with 50mm reinforced stainless steel top
  • Sliding door mechanism eliminates 300-400mm swing clearance
  • 1500x560mm internal cabinet dimensions for bulk ingredient containers or equipment
  • 150mm adjustable feet compensate for uneven floors and allow undercounter cleaning access
  • 49.1kg weight permits relocation without mechanical handling equipment
  • CE certified for UK, EU, NSF (USA), and CSA (Canada) food contact compliance

Technical Specifications

SpecificationDetails
Model / SKUQNH318
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight49.1 kg (108.2 lbs)

Construction & Build Quality

Body constructed from stainless steel with welded seams for liquid ingress resistance. Work surface uses 50mm thick stainless steel top rated for commercial cutting board and equipment loads. Sliding door tracks are stainless steel to prevent corrosion from wash-down protocols.

  • Stainless steel body and sliding door panels resist chloride and acid cleaning agents
  • Welded construction eliminates fastener corrosion points
  • 150mm height-adjustable feet with stainless steel or composite bases
  • Flat-pack delivery reduces freight volume and permits stairwell access during install

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies the QNH318 from UK inventory with freight to Europe, USA, Canada, Middle East, and Africa. Zodex manufactures the unit in Turkey to CE and international food equipment standards. Lead time for UK delivery is typically 5-7 working days from order confirmation.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical drawings, load capacity data, or freight quotation for the QNH318. WhatsApp and email support available for specification clarification and multi-unit procurement.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is used in the QNH318 construction?

A: The QNH318 uses food-grade stainless steel throughout body and door panels. Zodex typically specifies 304-grade stainless for work surfaces and 430-grade for cabinet body depending on regional compliance requirements. Confirm steel grade specification at time of order for specific regulatory environments.

Q: What is the load-bearing capacity of the 1600mm work surface?

A: The 50mm reinforced stainless steel top is rated for distributed loads typical of commercial food prep equipment including planetary mixers, slicers, and ingredient bins. Concentrated point loads should not exceed 100kg per 200mm² area. Confirm specific load requirements if mounting heavy fixed equipment.

Q: Are the cabinet legs adjustable for uneven floors?

A: The 150mm feet incorporate height adjustment threads providing approximately 20-30mm of leveling range. This compensates for floor gradients and permits undercounter cleaning access. Feet should be adjusted after positioning to ensure work surface is level for accurate portioning and equipment stability.

Q: Can a splash-back be added to the QNH318 for wall-mounted installations?

A: The QNH318 is supplied without integral splash-back. Zodex manufactures compatible bolt-on splash-backs in 100mm, 150mm, and 200mm heights for wall-adjacent installations. Splash-backs must be specified at time of order or retrofitted on-site using supplied mounting brackets.

Q: Is custom sizing available for non-standard kitchen layouts?

A: Zodex manufactures the QNH318 series in multiple standard widths from 1000mm to 2000mm in 200mm increments. Custom depth and height modifications require minimum order quantities and extended lead times. Contact TurcoBazaar with specific dimensional requirements for feasibility assessment and quotation.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.