



Ask a Question About This Product
This offer ends in:
The QNH812 is a 1000×600mm enclosed stainless steel work table with sliding cabinet doors and 100mm backsplash. It provides a hygienic prep surface and enclosed storage in a single footprint. Used in hotel kitchens, restaurant prep areas, catering production lines, and food processing operations where workspace and clean storage must be combined.
Commercial Application
Sliding door cabinets centralise storage beneath active prep zones. Tools, wrapped ingredients, and portioned mise en place remain accessible without staff moving between stations. The enclosed design prevents dust and splash contamination during high-volume service periods.
The 100mm backsplash contains liquid spills during washing, portioning, and plating tasks. The 950mm working height suits standing operators over extended shifts. Internal shelf divides storage vertically for trays, containers, and cleaning supplies.
Key Operational Advantages
- 1000×600×950mm working envelope — compact footprint for galley or pass layouts
- Sliding doors eliminate swing clearance requirements in narrow aisles
- Internal shelf: 900×560mm usable storage beneath worktop
- 100mm rear backsplash prevents wall splash during wet prep tasks
- 150mm stainless steel legs — stable on uneven commercial flooring
- 34.8 kg unit weight — two-person installation without lifting equipment
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | QNH812 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 34.8 kg (76.7 lbs) |
Construction & Build Quality
Cabinet fabricated from food-grade stainless steel with welded joints and polished exterior finish. Top bench thickness rated at 50mm for impact resistance during chopping and equipment placement. Sliding door tracks use stainless steel guides to prevent corrosion in wet environments.
- Stainless steel body and sliding door panels — non-porous surface for HACCP compliance
- Reinforced 50mm worktop — resists warping under repeated knife impact
- Welded frame construction — no fastener points for bacterial harbourage
- 150mm adjustable feet — compensates for floor gradient up to 15mm
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial furniture to UK buyers and international markets including Europe, North America, Middle East, and Africa. The QNH812 ships as a single-piece unit via pallet freight. Lead time averages 3–5 weeks from Turkish manufacturing facility to UK delivery address.
Frequently Asked Questions
Q: Is the QNH812 constructed from 304 or 430 grade stainless steel?
A: Cabinet body uses food-grade stainless steel meeting commercial kitchen hygiene standards. Zodex typically specifies 430 grade for structural components and 304 for food contact surfaces. Confirm grade requirements at order placement for specific compliance documentation.
Q: What is the maximum load capacity for the worktop and internal shelf?
A: Worktop rated for 80 kg distributed load across the 1000×600mm surface. Internal shelf supports 40 kg evenly distributed. Concentrated point loads exceeding 25 kg require reinforcement consultation.
Q: Are the 150mm legs height-adjustable for uneven floors?
A: Legs include threaded adjustment nuts providing ±15mm height compensation. Total working height adjusts between 935mm and 965mm to level the worktop on sloped or uneven commercial flooring.
Q: Can the backsplash height be customised above the standard 100mm?
A: Standard QNH812 specification includes fixed 100mm backsplash. Custom backsplash heights from 150mm to 300mm available as factory modification with minimum order quantities. Lead time extends 2–3 weeks for custom fabrication.
Q: Is the QNH812 available in different widths or depths for compact layouts?
A: Standard dimensions are 1000×600×950mm. Zodex manufactures work tables in 700mm, 1200mm, 1400mm, and 1600mm widths using the same sliding door cabinet design. Depth options include 600mm and 700mm. Confirm availability for non-standard sizes.