





Ask a Question About This Product
This offer ends in:
The QNH802 provides a 1200×600mm stainless steel worktop with enclosed sliding-door storage and 100mm rear splashback. Used for food preparation, ingredient staging, and equipment placement in commercial kitchens. Enclosed base cabinet holds utensils, dry goods, or small equipment while maintaining hygiene compliance.
Commercial Application
Operators place this unit in prep zones where both worktop access and enclosed storage are required. The sliding door design saves floor space in compact kitchens. Internal shelf stores bulk containers, small appliances, or cleaning supplies without exposing contents to prep area traffic.
During service prep, cooks stage ingredients on the worktop while drawing from cabinet storage below. The 100mm backsplash contains spills when working near walls or under ventilation hoods. 950mm working height matches standard commercial prep table ergonomics.
Key Operational Advantages
- 1200×600mm worktop: 0.72 m² working surface for batch prep or equipment staging
- Sliding doors: no swing clearance needed in tight galley layouts
- Internal dimensions 1100×560mm: holds standard 1/1 GN containers or bulk ingredient bins
- 100mm backsplash: prevents liquid migration to rear wall surfaces
- Stainless steel construction: non-porous surface meets HACCP requirements
- 50mm thick reinforced top: supports mixers, slicers, and heavy cutting tasks
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | QNH802 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 39.5 kg (87.1 lbs) |
Construction & Build Quality
Constructed from commercial-grade stainless steel with welded seams. The 50mm reinforced worktop withstands impact loads from heavy equipment and repetitive cutting tasks. Sliding door tracks are fabricated from corrosion-resistant materials for daily commercial operation.
- Stainless steel body and doors: resistant to acidic foods, cleaning agents, and moisture
- 150mm adjustable legs: compensate for uneven floor surfaces and facilitate cleaning beneath unit
- Internal shelf included: divides storage volume for organised ingredient access
- Welded corner joints: eliminate crevices where debris accumulates
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial cabinetry to operators in the UK, Europe, USA, Canada, Middle East, and Africa. Units ship from UK warehouse stock or direct from Turkish manufacturing facility depending on order volume. Freight quotations provided for multi-unit purchases or remote destinations.
Frequently Asked Questions
Q: What stainless steel grade is used in the QNH802 construction?
A: The QNH802 uses commercial-grade stainless steel meeting CE, NSF, and CSA food contact standards. Grade specification (304 or 430) can be confirmed at time of order based on operational environment and budget. Both grades provide corrosion resistance and hygiene compliance.
Q: What is the maximum load capacity for the worktop and internal shelf?
A: The 50mm reinforced worktop supports equipment loads up to 100 kg distributed evenly. Internal shelf holds approximately 30 kg when load is centred. Exceeding these limits may deform surfaces or damage sliding door mechanisms.
Q: Are the legs adjustable for uneven kitchen floors?
A: Yes. The 150mm legs feature threaded adjusters with approximately 20mm height variation. This compensates for floor slope and ensures stable worktop level. Adjustment also raises base clearance for cleaning access.
Q: Can the backsplash height be modified or removed?
A: The 100mm backsplash is welded to the worktop and cannot be removed without compromising structural integrity. Custom backsplash heights (150mm or 200mm) can be specified for made-to-order units with lead time. Contact for custom dimension pricing.
Q: Is custom sizing available for different kitchen layouts?
A: Zodex manufactures work tables in custom widths (800mm to 2400mm) and depths (600mm to 800mm) upon request. Minimum order quantities apply for non-standard dimensions. Lead time extends to 6-8 weeks for custom fabrication.