





Ask a Question About This Product
This offer ends in:
The QNH816 is a 1600mm stainless steel work table with enclosed sliding door cabinet and 100mm rear splashback. It provides 1.6 square metres of food-contact workspace at 950mm working height with 560mm internal cabinet clearance. Used in commercial kitchens, hotel prep areas, and catering production facilities where enclosed hygienic storage is required beneath the work surface.
Commercial Application
Enclosed cabinet design eliminates open shelving contamination risks in food preparation zones. Sliding doors provide access to stored ingredients, containers, or small equipment without swing clearance requirements. Backsplash contains spillage and meets wall-mounted hygiene barriers required in many health inspections.
Operators use the 1600x600mm surface for ingredient portioning, plating, or equipment staging during service. The 560mm internal height accommodates standard 1/1 gastronorm containers stacked two-high or 400mm mixing bowls. Cabinet doors remain accessible during prep without interfering with adjacent work zones.
Key Operational Advantages
- 304-grade stainless steel construction provides corrosion resistance in wet commercial environments
- 50mm reinforced work surface supports 150kg distributed load capacity
- 1500x560mm internal cabinet with adjustable middle shelf accommodates varied storage heights
- 150mm stainless steel legs with adjustable feet compensate for uneven floor surfaces
- 100mm rear splashback prevents wall splash contact and facilitates hosing during cleaning
- Sliding door mechanism eliminates 400mm swing clearance required by hinged cabinets
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | QNH816 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 49.8 kg (109.8 lbs) |
Construction & Build Quality
Work surface fabricated from 1.2mm 304-grade stainless steel with reinforced 50mm edge profile. Cabinet body constructed from 0.8mm stainless steel with welded corners and brushed finish. Sliding door tracks use commercial-grade ball-bearing rollers rated for 50,000 cycles.
- Fully welded stainless steel frame with no mechanical fasteners in food contact zones
- 150mm height-adjustable legs with 50mm diameter stainless steel feet
- Removable middle shelf with 40kg load capacity
- CE-certified construction meets UK, EU, NSF and CSA commercial kitchen standards
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial work tables to operations in the UK, Europe, USA, Canada, Middle East, and Africa. Freight quotations provided for multi-unit orders or container consolidation. Unit weight of 49.8kg permits two-person installation without lifting equipment.
Frequently Asked Questions
Q: Is this 304 or 430 grade stainless steel?
A: The QNH816 uses 304-grade stainless steel for work surface and cabinet body. This grade provides superior corrosion resistance in wet food preparation environments compared to 430 grade. Legs and internal shelf also fabricated from 304 stainless.
Q: What is the maximum load capacity for the work surface?
A: Work surface supports 150kg distributed load across the 1600x600mm area. The 50mm reinforced edge profile prevents deflection under normal commercial use. Internal cabinet shelf rated for 40kg evenly distributed.
Q: Are the legs and internal shelf height-adjustable?
A: Legs adjust 30mm via threaded feet to compensate for uneven floors. Internal shelf repositions in 50mm increments using welded support brackets. Total working height remains 950mm including 100mm backsplash.
Q: Can the backsplash height be modified?
A: Standard unit includes 100mm rear splashback. Custom 150mm or 200mm backsplash available on orders of five or more units with four-week lead time. Splashback welded during fabrication and cannot be field-modified.
Q: Is custom sizing available for narrower kitchen layouts?
A: Zodex manufactures QNH-series tables in 1200mm, 1400mm, 1600mm, 1800mm and 2000mm widths. Depth options include 600mm, 700mm and 800mm. Minimum order quantity of three units required for non-standard dimensions.