





Ask a Question About This Product
This offer ends in:
QNH906 is a wall-mounted stainless steel storage cabinet measuring 1500x400x650mm external dimensions. Sliding doors provide access to dual-height internal shelving across 1400mm internal width. Used in commercial kitchens, prep rooms, and catering facilities where hygiene-compliant overhead storage is required.
Commercial Application
Wall mounting removes storage from floor zones where traffic, spills, and cleaning equipment operate. Stainless steel enclosure protects dry goods, utensils, and small equipment from airborne contamination. Sliding mechanism eliminates door swing radius in narrow prep corridors.
Internal shelf divides 550mm vertical clearance into 290mm lower and 250mm upper compartments. Kitchen managers store plating tools, packaged consumables, or small appliances according to access frequency. Non-porous surface meets daily wash-down protocols in food-contact environments.
Key Operational Advantages
- External dimensions 1500x400x650mm with 1400mm usable internal width
- Internal shelf creates dual storage zones at 290mm and 250mm heights
- Sliding door operation requires zero clearance swing space
- Stainless steel construction rated for commercial kitchen hygiene standards
- 31.95 kg unit weight suitable for standard masonry or stud wall mounting
- Flat-pack shipping reduces freight volume for multi-unit orders
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | QNH906 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 31.95 kg (70.4 lbs) |
Construction & Build Quality
Cabinet shell constructed from food-grade stainless steel with welded corners and reinforced mounting brackets. Sliding door track system operates on enclosed roller bearings. Internal shelf panel supports distributed loads across full 1400mm span without central column interference.
- Stainless steel body with welded seam construction
- Enclosed roller bearing door tracks resist debris accumulation
- Removable internal shelf for flexible height configuration
- Pre-drilled rear mounting points for wall installation
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex QNH906 cabinets to commercial operators in UK, Europe, USA, Canada, Middle East, and Africa. Units ship flat-packed with assembly hardware included. Multi-unit orders receive consolidated freight quotations for container or pallet shipment.
Frequently Asked Questions
Q: What grade stainless steel is used in the QNH906 cabinet construction?
A: Zodex manufactures the QNH906 from food-grade stainless steel meeting commercial kitchen hygiene standards. Specific alloy grade (304 or 430) confirmed at time of order. Both grades provide corrosion resistance and non-porous surface required for food-contact environments.
Q: What is the load-bearing capacity of the internal shelf?
A: Internal shelf supports evenly distributed loads up to 25 kg across the 1400mm span. Point loads concentrated in single areas should not exceed 10 kg. Shelf is removable for full-height storage when required.
Q: Is the internal shelf height adjustable after installation?
A: Internal shelf is fixed at 290mm from cabinet base. Shelf can be removed entirely for single-compartment use but does not adjust to intermediate positions. Custom shelf positioning requires factory specification at time of order.
Q: What wall types support the 31.95 kg cabinet weight when fully loaded?
A: Solid masonry, concrete block, or timber stud walls with appropriate fixings support the cabinet plus 40 kg contents. Plasterboard requires backing板 or stud location with through-bolts. TurcoBazaar provides mounting specifications for different wall constructions.
Q: Can the QNH906 be ordered in custom widths for specific wall dimensions?
A: Standard production is 1500mm width as specified. Custom widths from 1000mm to 2000mm available through factory special order with minimum quantity requirements. Lead time extends 4-6 weeks for non-standard dimensions.