





Ask a Question About This Product
This offer ends in:
The WT70150G is a flat-pack stainless steel work table measuring 1500×700×900mm, designed for food preparation and assembly tasks in commercial kitchens. The top shelf supports 250 kg and the lower shelf carries 200 kg. Kitchen managers install it in prep zones, plating stations, and dry goods assembly areas.
Commercial Application
Work tables anchor prep workflow in restaurant kitchens and central production facilities. The 1500mm length accommodates two-person simultaneous tasks during service assembly. The lower shelf stores bulk containers, cutting boards, or plated desserts awaiting service.
Operators use the 700mm depth for plate assembly, vegetable cutting, and dry ingredient portioning. The 900mm working height matches standard commercial kitchen ergonomics. The stainless steel surface cleans with quaternary ammonium sanitiser between service periods.
Key Operational Advantages
- Top shelf load capacity: 250 kg distributed across 1500×700mm surface
- Bottom shelf capacity: 200 kg for bulk container storage
- 2mm 201 grade stainless steel worktop with non-porous food contact surface
- Galvanised steel legs with plastic adjustable feet for uneven floor levelling
- Flat-pack design reduces freight volume by 60% compared to welded-frame units
- 23 kg unit weight allows two-person assembly without lifting equipment
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WT70150G |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 23.0 kg (50.7 lbs) |
Construction & Build Quality
The worktop uses 2mm 201 grade stainless steel with a brushed finish. The frame and lower shelf are galvanised steel. Plastic bullet feet adjust ±15mm to compensate for floor gradients.
- 2mm stainless steel top resists knife scoring and acidic food contact
- Galvanised steel frame prevents rust in high-humidity environments
- Adjustable feet maintain level surface on uneven quarry tile floors
- Flat-pack bolted assembly allows disassembly for relocation or deep cleaning
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial furniture from UK warehouse stock to purchasing managers worldwide. Standard shipping covers UK mainland, Europe, USA, Canada, Middle East, and Sub-Saharan Africa. Volume orders of 10+ units qualify for consolidated freight pricing.
Frequently Asked Questions
Q: What grade of stainless steel is used in the WT70150G worktop?
A: The worktop is 2mm 201 grade stainless steel. 201 grade contains manganese for corrosion resistance in dry and low-moisture food prep environments. It is not marine-grade but meets commercial kitchen hygiene standards for food contact surfaces.
Q: Can the shelf height be adjusted after assembly?
A: The bottom shelf mounts at a fixed height determined by pre-drilled bolt holes. The plastic bullet feet adjust ±15mm vertically to level the table on uneven floors. Shelf position cannot be reconfigured without drilling new mounting holes.
Q: Does the WT70150G include a splashback or upstand?
A: No. This model has no rear or side splashbacks. Operators position it away from walls or order separate upstand panels if local health codes require splash protection near sinks or wet prep zones.
Q: What is the maximum distributed load for each shelf?
A: The top shelf carries 250 kg evenly distributed. The bottom shelf supports 200 kg. Concentrated point loads exceeding 50 kg in a 300×300mm area may deform the shelf surface.
Q: Is custom sizing available for different kitchen layouts?
A: Standard Zodex dimensions are 1500×700mm, 1200×700mm, and 1800×700mm. Custom width or depth requests require minimum order quantities of 20 units with 8–10 week lead times from the Turkish manufacturing facility.