
Ask a Question About This Product
This offer ends in:
The WT6030G is a compact stainless steel work table with integrated undershelf. Dimensions are 300 mm wide, 600 mm deep, 900 mm high. Used in commercial kitchens where space is limited and hygienic food-contact surfaces are required.
Commercial Application
This table serves as a prep station in tight galley kitchens, small cafés, and food production areas where wall space is restricted. The undershelf provides storage for pans, containers, or equipment within arm's reach. Flatpack assembly reduces freight costs and allows transport through narrow doorways.
Operators use this unit for mise en place during service prep or as an auxiliary station near cooking lines. The 250 kg top shelf capacity handles mixers, slicers, or stacked sheet pans. The 200 kg undershelf supports ingredient bins or backup equipment during peak hours.
Key Operational Advantages
- Top shelf rated for 250 kg, undershelf for 200 kg
- 2 mm stainless steel worktop with non-porous food-contact surface
- Flatpack format ships economically, assembles in under 20 minutes
- Stainless steel legs and undershelf resist corrosion in wet environments
- Adjustable plastic bullet feet compensate for uneven flooring
- Meets CE hygiene standards for food contact surfaces
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WT6030G |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 5.0 kg (11.0 lbs) |
Construction & Build Quality
The worktop is 2 mm stainless steel. Legs and undershelf use galvanised steel with stainless finish. Plastic bullet feet provide height adjustment and floor protection. Flatpack components ship with socket connectors for tool-free assembly.
- 2 mm stainless steel top surface — food-safe, non-porous
- Galvanised steel legs and undershelf frame with corrosion resistance
- Socket connector system allows assembly without welding or specialist tools
- Adjustable feet level table on floors with up to 10 mm variation
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this table from UK warehouses to commercial buyers in Europe, North America, Middle East, and Africa. Flatpack format reduces freight volume and permits courier shipment for single units. Multi-unit orders qualify for pallet pricing with reduced per-unit cost.
Frequently Asked Questions
Q: What grade of stainless steel is used in the worktop?
A: The top shelf is 2 mm 201-grade stainless steel. This grade provides food-safe surface finish and corrosion resistance for most commercial kitchen environments. Higher grades are available on request for coastal or high-humidity locations.
Q: What is the maximum load capacity for the top shelf?
A: Top shelf capacity is 250 kg when load is evenly distributed. The undershelf supports 200 kg. Concentrated loads should be centred to avoid deformation of the work surface.
Q: Are the legs height-adjustable?
A: The plastic bullet feet adjust approximately ±10 mm to compensate for uneven flooring. Overall table height is fixed at 900 mm. Custom leg heights can be specified for orders of ten or more units.
Q: Can a splashback be added to this model?
A: This model does not include a splashback. Splashback retrofits are not available due to the flatpack construction method. Models with integrated splashbacks are listed separately in the work table range.
Q: Is custom sizing available for this table?
A: Custom widths and depths can be manufactured for orders of five units or more. Lead time is typically 4–6 weeks from order confirmation. Minimum custom width is 400 mm; maximum is 2000 mm in 100 mm increments.