Commercial Stainless Steel Work Table No Bottom shelf 2100x700x900mm | TurcoBazaar WT70210GNU

Commercial Stainless Steel Work Table No Bottom shelf 2100x700x900mm | TurcoBazaar WT70210GNU
Commercial Stainless Steel Work Table No Bottom shelf 2100x700x900mm | TurcoBazaar WT70210GNU
3-4 Weeks
Commercial Stainless Steel Work Table No Bottom shelf 2100x700x900mm | TurcoBazaar WT70210GNU
Commercial Stainless Steel Work Table No Bottom shelf 2100x700x900mm | TurcoBazaar WT70210GNU
Commercial Stainless Steel Work Table No Bottom shelf 2100x700x900mm | TurcoBazaar WT70210GNU
This offer ends in:
Days
Hours
Min
Sec
from Save -65%
£174.00
£490.80
Ex Tax: £174.00
  • Stock: 3-4 Weeks
  • Brand: Zodex
  • Model: WT70210GNU
  • SKU: WT70210GNU
Sold: 0
Views: 1069
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The WT70210GNU is a commercial-grade stainless steel work table measuring 2100×700×900mm with no undershelf. It provides a hygienic, non-porous workspace for food preparation in hotel kitchens, restaurants, and catering facilities. The open base design allows unobstructed access for large equipment or waste bins beneath the work surface.

Commercial Application

This table functions as a central prep station in high-volume commercial kitchens. The open frame eliminates the lower shelf, creating clearance for mixers, robot coupes, or waste receptacles during active service. Kitchen managers use this configuration when vertical equipment storage takes priority over horizontal storage capacity.

During service, the 2.1-metre surface accommodates multiple simultaneous prep tasks across several cooks. The 700mm depth provides sufficient working distance without obstructing walkways in narrow galley kitchens. Height of 900mm matches standard commercial counter ergonomics for standing work over extended shifts.

Key Operational Advantages

  • Top surface rated to 250kg distributed load capacity
  • 2mm stainless steel worktop resists corrosion in wet environments
  • Six-leg frame construction distributes weight evenly across floor surface
  • Adjustable bullet feet compensate for uneven floor levels up to 15mm
  • Open base design permits placement of 80-litre wheeled bins or floor-standing equipment
  • Flat-pack delivery reduces freight cost on international shipments

Technical Specifications

SpecificationDetails
Model / SKUWT70210GNU
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight30.0 kg (66.1 lbs)

Construction & Build Quality

The worktop uses 2mm grade 201 stainless steel with welded seams and rounded front edge. Frame construction combines stainless steel legs with galvanized steel socket joints. Plastic bullet feet provide height adjustment and floor protection across tile, concrete, or resin surfaces.

  • 2mm stainless steel top with polished finish
  • Galvanized steel leg frame resists moisture damage
  • Six-point support structure for stability under asymmetric loads
  • Adjustable feet compensate for drainage slopes in wet areas

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies Zodex commercial furniture from UK inventory to professional buyers worldwide. Standard delivery covers the United Kingdom, European Union, United States, Canada, Middle East territories, and Sub-Saharan Africa. Freight cost for this 30kg flat-pack unit averages £45–85 for UK mainland, with international quotations provided on request for consolidated shipments.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical specification sheets, load testing certificates, or freight quotation for multiple units. WhatsApp enquiries receive response within four working hours during UK business days.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is used in the worktop?

A: The work surface uses 2mm grade 201 stainless steel. This specification provides adequate corrosion resistance for dry and moist food prep applications. Frame components use galvanized steel rather than stainless to reduce cost while maintaining structural integrity.

Q: What is the maximum load capacity for this table?

A: The top surface supports 250kg distributed load across the full 2100×700mm area. Concentrated point loads must not exceed 80kg in any 400×400mm section. Six-leg construction distributes weight evenly to prevent floor damage in installations over suspended or raised flooring.

Q: Are the legs height-adjustable?

A: Plastic bullet feet provide approximately 15mm of height adjustment per leg. This range compensates for drainage slopes or uneven floor surfaces common in commercial wet areas. Total table height remains fixed at 900mm to maintain ergonomic compatibility with standard commercial counter heights.

Q: Can a splash-back be added to this model?

A: This model ships without integral splash-back. Zodex manufactures compatible bolt-on upstands in 100mm and 150mm heights for installation against wall surfaces. Splash-backs must be ordered separately and require eight M6 bolts for secure attachment to the rear table edge.

Q: Is custom sizing available for non-standard kitchen layouts?

A: Zodex accepts custom dimension orders for tables between 1200mm and 2400mm length and 600mm to 800mm depth. Minimum order quantity for bespoke sizing is typically six units. Lead time extends to 8–12 weeks for non-standard fabrication with 30% deposit required at order confirmation.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.