



Ask a Question About This Product
This offer ends in:
The WT70150GBNU is a flat-pack stainless steel work table with a 1500×700mm surface and rear upstand. It provides a hygienic food-contact workspace for prep stations, portioning lines, and assembly areas. The open base allows floor cleaning while the upstand prevents rear wall splash.
Commercial Application
Used where floor access is required beneath the work surface. Common in cleaning-focused operations, mobile prep stations, and facilities with frequent deep sanitation schedules. The absence of an under shelf increases leg clearance and simplifies mopping protocols.
Installed at portioning stations, salad prep lines, sandwich assembly areas, and temporary catering setups. The 250 kg top capacity handles batch prep equipment, electric slicers, and stacked tray loads during service rushes.
Key Operational Advantages
- Top surface rated to 250 kg static load
- 40mm rear upstand prevents wall splash during wet prep
- Open base design allows floor cleaning equipment to pass beneath
- Plastic bullet feet provide 20–30mm height adjustment for uneven floors
- Flat-pack delivery reduces freight costs on multi-unit orders
- Stainless steel top and galvanized legs reduce material cost while maintaining food-safe contact surface
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WT70150GBNU |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 21.0 kg (46.3 lbs) |
Construction & Build Quality
The worktop uses 1.2mm stainless steel with welded construction. Legs are galvanized steel with plastic adjustable feet. The upstand is formed from the same 1.2mm sheet stock, welded at the rear joint.
- 1.2mm stainless steel worktop surface for direct food contact
- Galvanized steel legs resist corrosion in wet floor environments
- Plastic bullet feet adjust 20–30mm for leveling
- Flat-pack assembly reduces shipping volume by 60% compared to welded units
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex-manufactured work table from UK stock with 1–3 day dispatch. Worldwide shipping available to Europe, USA, Canada, Middle East, and Africa. Multi-unit orders ship via pallet freight with volume pricing on request.
Frequently Asked Questions
Q: What grade of stainless steel is used on the worktop?
A: The top surface is 1.2mm stainless steel. Most Zodex commercial tables use 201-grade stainless for cost efficiency, with 304-grade available on request for high-chloride environments.
Q: What is the maximum safe load capacity?
A: The worktop is rated to 250 kg static load when evenly distributed. Concentrated point loads should not exceed 80 kg to avoid surface deformation.
Q: Are the legs height-adjustable?
A: Plastic bullet feet provide 20–30mm of height adjustment to compensate for uneven floors. Legs are not telescoping but can be trimmed during assembly if lower height is required.
Q: Can the upstand height be customized?
A: The standard unit includes a 40mm rear upstand. Custom upstand heights or three-sided splash guards are available on made-to-order units with 10–15 day lead time.
Q: Does the table ship fully assembled?
A: The unit ships flat-packed to reduce freight costs. Assembly requires basic hand tools and takes approximately 20–30 minutes per table.