



Ask a Question About This Product
This offer ends in:
Stainless steel work table with 40mm rear upstand. Measures 1800×700×900mm. Provides food-safe preparation surface in commercial kitchens without bottom shelf storage.
Commercial Application
Installed where floor-level cleaning access is required. The open base allows sanitation crews to mop underneath during close-down. Hygienic option for prep zones subject to strict environmental health audit.
Used for ingredient portioning, plating assembly, and general prep tasks. The 1800mm length accommodates two operators working side-by-side during service peaks. Top shelf supports 250kg distributed load.
Key Operational Advantages
- 1800×700mm work surface with 40mm rear upstand to prevent spillage
- Top shelf rated to 250kg distributed load capacity
- Open base design allows floor cleaning access underneath unit
- Stainless steel bullet feet provide levelling adjustment on uneven floors
- Flatpack delivery reduces freight cost for international shipments
- 24kg total weight enables two-person assembly and repositioning
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WT70180GBNU |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 24.0 kg (52.9 lbs) |
Construction & Build Quality
Work surface fabricated from 2mm 201-grade stainless steel. Leg frames use galvanised steel with stainless steel sockets. Plastic bullet feet provide minor height adjustment on uneven commercial floor surfaces.
- 2mm stainless steel worktop with hygienic welded corners
- Galvanised steel leg frame with stainless steel sockets
- Plastic bullet feet for levelling adjustment
- 40mm welded upstand at rear edge
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial furniture from UK warehouse. Delivery available to Europe, USA, Canada, Middle East, and Africa. Flatpack shipping reduces international freight charges for hotel and catering projects.
Frequently Asked Questions
Q: What grade of stainless steel is used in the worktop?
A: Work surface is 2mm 201-grade stainless steel. Leg frames use galvanised steel with stainless steel sockets. This construction meets CE hygiene standards for food contact surfaces.
Q: What is the maximum load capacity?
A: Top shelf supports 250kg distributed load. This rating applies to evenly distributed weight across the full 1800×700mm surface. Point loads should not exceed manufacturer guidance.
Q: Are the legs adjustable for uneven floors?
A: Plastic bullet feet provide minor levelling adjustment. Each foot adjusts independently to compensate for floor irregularities. Total adjustment range is approximately 15mm per foot.
Q: Can a bottom shelf be added later?
A: This model is supplied without bottom shelf provision. The WT70180GB variant includes bottom shelf if undercounter storage is required. Retrofitting shelves to this open-base unit is not supported.
Q: Is the table supplied fully assembled?
A: Unit ships flatpacked to reduce freight cost. Assembly requires basic hand tools and takes approximately 30 minutes with two people. All fixings and assembly instructions are included.