



Ask a Question About This Product
This offer ends in:
This stainless steel work table measures 2100×600×900mm with a 40mm rear upstand. The unit provides 1.26 square metres of flat food preparation surface without under-shelf obstruction. Open base design facilitates floor cleaning and accommodates wheeled bins or storage containers underneath.
Commercial Application
The open base configuration suits operations requiring frequent floor sanitation or under-table storage access. Six-leg construction distributes load across 2.1 metre span without centre support interfering with workspace below. The rear upstand prevents liquid migration to wall surfaces during wet food prep tasks.
Kitchen staff use the clear work surface for vegetable preparation, plating assembly, or equipment staging during service periods. The 250kg worktop load capacity accommodates heavy mixers, food processors, or stacked ingredient containers. Plastic bullet feet enable minor height adjustment on uneven commercial kitchen floors.
Key Operational Advantages
- 2.1 metre span provides workspace for two operators simultaneously
- No under-shelf allows floor-level cleaning equipment access and mobile bin positioning
- 40mm upstand prevents splatter migration during wet prep tasks
- 250kg top load capacity supports commercial mixers and heavy equipment
- Six-leg frame distributes weight without centre obstruction
- Flat-pack delivery reduces freight costs for multi-site rollouts
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WT60210GBNU |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 26.0 kg (57.3 lbs) |
Construction & Build Quality
The worktop uses 1.2mm stainless steel over a reinforced frame. Legs are galvanised steel tube with welded socket joints at worktop interface. Plastic bullet feet thread into leg bases for minor levelling adjustments up to 15mm. All load-bearing joints use mechanical fasteners rather than spot welds.
- 1.2mm stainless steel worktop grade 201
- Galvanised steel leg construction resists corrosion in wet environments
- Welded socket connections at worktop-to-leg interface
- Threaded plastic bullet feet for levelling on uneven floors
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex work table from UK warehouse stock to commercial buyers worldwide. Standard dispatch to UK mainland addresses occurs within 1–3 working days. International shipping serves Europe, USA, Canada, Middle East, and African territories with documented freight quotations provided before order confirmation.
Frequently Asked Questions
Q: What grade of stainless steel is used in the worktop?
A: The worktop uses grade 201 stainless steel at 1.2mm thickness. This grade provides corrosion resistance and hygiene compliance for food contact surfaces. Legs use galvanised steel construction rather than stainless steel.
Q: What is the maximum safe load capacity for this work table?
A: The worktop supports 250kg distributed load when assembled correctly on level flooring. Concentrated point loads exceeding 80kg require load-spreading platforms. Six-leg construction distributes weight without centre support interference.
Q: Are the legs height-adjustable for uneven floors?
A: Plastic bullet feet thread into leg bases providing approximately 15mm height adjustment range. This compensates for minor floor irregularities common in older commercial kitchens. For variations exceeding 15mm, floor levelling or shim installation is required.
Q: Can the upstand be removed if not required?
A: The 40mm upstand is welded to the worktop rear edge and cannot be removed without cutting equipment. Units without upstands require separate model specification at order stage. Retrospective removal voids structural warranty coverage.
Q: Is custom sizing available for non-standard kitchen layouts?
A: Standard production runs use fixed dimension tooling for the 2100×600mm footprint. Custom sizing requires minimum order quantities and extended lead times of 6–8 weeks. Contact TurcoBazaar technical team with specific dimension requirements and site constraints for feasibility assessment.