
Ask a Question About This Product
This offer ends in:
This stainless steel work table provides a 900×600mm food-safe preparation surface at 900mm working height with 40mm rear upstand. Flatpack construction ships at 12kg with top shelf load capacity of 250kg. Used in hotel prep areas, restaurant kitchens, and catering production where hygienic worktop space is required without lower storage.
Commercial Application
Installed where workflow requires accessible floor space beneath the work surface. Common in bakery finishing stations, plating zones, or locations where mobile equipment or waste bins must pass underneath. The rear upstand prevents spillage onto rear walls during ingredient prep or portioning.
Deployed during high-volume prep when operators need multiple clear surfaces positioned at service height. The 250kg load capacity supports mixers, slicers, or stacked ingredient containers during extended production runs. Open base allows cleaning crew access for daily washdown without moving the unit.
Key Operational Advantages
- 250kg top shelf load capacity supports heavy mixers and portioning equipment
- 900×600mm surface suits standard 1/1 gastronorm trays and cutting boards
- 40mm upstand prevents liquid spillage onto walls during ingredient processing
- Open base design allows floor cleaning equipment and mobile bins to pass underneath
- 12kg flatpack weight reduces freight costs on multi-unit orders
- Plastic bullet feet provide height micro-adjustment on uneven floors
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WT6090GBNU |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 12.0 kg (26.5 lbs) |
Construction & Build Quality
Worktop fabricated from 2mm 201 stainless steel with food-contact finish. Legs and frame use galvanized steel with stainless steel sockets. Plastic adjustable feet compensate for floor irregularities up to 15mm.
- 2mm 201 stainless steel worktop surface
- Galvanized steel leg frame with stainless sockets
- Plastic bullet feet for height adjustment
- Flatpack assembly with pre-drilled fixing points
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex work table from UK stock to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. Unit ships flatpacked at 12kg, reducing international freight costs when ordering multiple tables for new installations or kitchen refits. Standard dispatch within 1–3 working days from order confirmation.
Frequently Asked Questions
Q: Is this 304 or 430 grade stainless steel?
A: Worktop is 2mm 201 stainless steel. Suitable for dry prep and plating work. For wet environments or high-acid contact, specify 304 grade units from our custom range.
Q: What is the maximum safe load on the worktop?
A: Top shelf rated to 250kg evenly distributed. Concentrate heavy mixers or slicers over leg positions for maximum stability. Avoid point loads exceeding 80kg.
Q: Are the legs adjustable for uneven floors?
A: Plastic bullet feet provide ±15mm height adjustment per leg. Sufficient for most commercial kitchen floors. Shim if variance exceeds this range.
Q: Can I add a lower shelf later?
A: This model has no lower shelf mounting points. Order model WT6090GB for same dimensions with bottom shelf. Retrofit not supported.
Q: Is custom sizing available for tighter spaces?
A: Standard sizes ship from stock. Custom widths and depths available on request with 3–4 week lead time and 10-unit minimum order. Contact for quotation.