



Ask a Question About This Product
This offer ends in:
The WT7090GBNU is a flatpack stainless steel work table with rear upstand and open base. Measures 900×700×900mm with a 2mm stainless steel worktop rated to 250 kg. Used in restaurants, hotel prep areas, and central production kitchens where floor access or cleaning underneath is required.
Commercial Application
Open-base tables allow operators to position mobile equipment or waste bins underneath the workspace. The 40mm rear upstand prevents spills from running onto walls or equipment behind the table. In high-turnover kitchens, the absence of a lower shelf reduces food particle accumulation and speeds end-of-service cleaning.
Operators position this table at prep stations, plating lines, or ingredient assembly points. The 250 kg load rating accommodates mixers, slicers, or stacked ingredient containers during service. The 900mm height matches most commercial counter heights for standing work.
Key Operational Advantages
- 2mm stainless steel worktop supports 250 kg distributed load
- 40mm welded upstand at rear edge prevents liquid run-off
- No lower shelf — floor remains accessible for cleaning and mobile storage
- Stainless steel legs with plastic adjustable feet for uneven floors
- Flatpack delivery reduces freight cost on multi-unit orders
- CE-certified construction meets UK, EU, US NSF and Canadian CSA hygiene standards
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WT7090GBNU |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 15.0 kg (33.1 lbs) |
Construction & Build Quality
The worktop is fabricated from 2mm grade 201 stainless steel with welded corners and a 40mm rear upstand. Legs are stainless steel tube with galvanised sockets and plastic bullet feet for height adjustment. All food-contact surfaces are non-porous and resistant to acidic cleaning agents.
- 2mm stainless steel worktop with welded upstand
- Stainless steel tubular legs with galvanised sockets
- Plastic adjustable feet compensate for floor irregularities
- Flatpack assembly — supplied with fixing hardware
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Turkish-manufactured commercial furniture to operators in the UK, Europe, USA, Canada, Middle East and Africa. The WT7090GBNU ships flatpacked to reduce freight charges on container or pallet orders. Lead time is 1–3 working days for UK stock; international orders are quoted individually based on destination and quantity.
Frequently Asked Questions
Q: What grade of stainless steel is used in the worktop?
A: The worktop is 2mm grade 201 stainless steel. Grade 201 provides corrosion resistance suitable for food preparation environments. It meets CE hygiene standards for commercial kitchens.
Q: What is the maximum load capacity of the worktop?
A: The table supports a distributed load of 250 kg across the 900×700mm surface. Point loads from heavy equipment should be distributed using equipment mats or pads.
Q: Are the legs height-adjustable?
A: Yes. Plastic bullet feet at the base of each leg allow height adjustment of approximately ±15mm to compensate for uneven floors.
Q: Can I order this table with a lower shelf instead of open base?
A: Yes. TurcoBazaar supplies the same model with a galvanised lower shelf. Contact the team with your requirement and they will confirm the alternative model code and price.
Q: Is assembly required, and what tools are needed?
A: The table ships flatpacked and requires assembly. A single operator can complete assembly in 15–20 minutes using a 13mm spanner or socket set. Fixing hardware is included.