
Ask a Question About This Product
This offer ends in:
The YLS757500 provides a 750×750mm stainless steel workspace with 100mm rear backsplash for food contact operations. Built from 1.0mm 201-grade stainless steel at 13kg total weight, this unit handles daily prep tasks in commercial kitchens, hotel back-of-house areas, and catering production lines. Adjustable feet accommodate uneven flooring common in older kitchen infrastructure.
Commercial Application
This work table functions as a dedicated prep station in compact commercial kitchens where floor space limits equipment footprint. The backsplash protects wall surfaces during vegetable processing, plating assembly, and ingredient portioning. Reinforced undershelf frame distributes load across the structure during sustained use.
Kitchen staff use this surface for mise en place preparation before service periods. The 750×750mm footprint fits between existing equipment banks without blocking service aisles. Adjustable feet level the table on floors with drainage slopes or tile irregularities.
Key Operational Advantages
- 750×750mm surface area with 870mm working height
- 1.0mm 201-grade stainless steel construction at 13kg unit weight
- 100mm integrated backsplash prevents wall contact during wet prep
- Reinforced undershelf frame supports sustained commercial use
- Adjustable feet accommodate floor variations up to 25mm
- Non-porous surface meets food contact hygiene standards
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | YLS757500 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 13.0 kg (28.7 lbs) |
Construction & Build Quality
The YLS757500 uses 1.0mm 201-grade stainless steel across work surface and backsplash. This gauge provides adequate rigidity for hand prep tasks while maintaining a manageable 13kg shipping weight. Welded corner joints and reinforced undershelf frame prevent lateral movement during operation.
- 1.0mm 201-grade stainless steel sheet construction
- Welded corner joints at backsplash interface
- Reinforced tubular frame beneath work surface
- Screw-adjustable levelling feet with 25mm range
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex-manufactured work table from UK warehouse stock to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. Freight consolidation is available for multi-unit orders to catering chains and hotel groups. Regional distributors handle customs documentation for non-EU territories.
Frequently Asked Questions
Q: What stainless steel grade is used in this work table?
A: The YLS757500 uses 201-grade stainless steel at 1.0mm thickness. This grade provides adequate corrosion resistance for dry and wet food prep environments. For operations requiring marine-grade resistance, 304-grade units are available on request.
Q: What is the maximum load capacity of this table?
A: The reinforced undershelf frame supports evenly distributed loads up to 80kg across the 750×750mm surface. Concentrated point loads should not exceed 40kg in any single area. The frame design prevents surface deflection during sustained commercial use.
Q: Are the legs adjustable for uneven kitchen floors?
A: Screw-adjustable feet provide 25mm height adjustment range to level the table on sloped or irregular flooring. Each foot includes a lock nut to maintain position after adjustment. This accommodates drainage slopes common in commercial kitchen construction.
Q: Can the backsplash height be customised?
A: The standard YLS757500 includes a fixed 100mm backsplash. Custom backsplash heights from 150mm to 300mm are available through factory order with 4-6 week lead time. Minimum order quantity of 5 units applies to custom specifications.
Q: Is this table available in other dimensions?
A: Zodex produces this model in 600×600mm, 750×750mm, 1000×700mm, and 1200×700mm configurations from stock. Custom dimensions require factory tooling with 10-unit minimum order. Lead time for non-standard sizes is 6-8 weeks from deposit.