



Ask a Question About This Product
This offer ends in:
This 1800x700mm work table provides a food-safe stainless steel prep surface with integrated vertical storage, drawer compartment, and GN pan rack. The unit accommodates 5×1/1 GN pans in the side rack and delivers 1800mm of continuous worktop space. Kitchen staff use it for ingredient prep, plating, and temporary holding of mise en place.
Commercial Application
The table functions as a central prep station in operations requiring both horizontal workspace and immediate-access storage. The overshelf keeps utensils and small containers within arm's reach while the GN rack holds prepared ingredients at waist height. This reduces walking distance during service and consolidates multiple storage functions into one footprint.
During peak service, cooks use the main surface for plating and assembly while the drawer holds hand tools and the rack holds sauces or garnishes. The 1800mm width allows two staff members to work simultaneously on separate tasks. The overshelf prevents counter clutter by elevating secondary items above the active work plane.
Key Operational Advantages
- 430-grade stainless steel top, 1.2mm thickness, meets food contact hygiene standards
- Accommodates 5×1/1 GN pans (100mm depth) in side-mounted rack
- Drawer interior measures 506×506×100mm for hand tool storage
- Two-tier overshelf at 300mm depth provides 3600mm total shelf length
- Galvanized steel undershelf and leg assembly, 76 kg total unit weight
- Four integrated side hooks for utensil hanging
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WT70180PS |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 76.0 kg (167.6 lbs) |
Construction & Build Quality
The worktop uses 430-grade stainless steel at 1.2mm gauge, welded to a galvanized steel frame. The undershelf, legs, and overshelf structure use galvanized steel for corrosion resistance in wet environments. The drawer runs on commercial-grade slides rated for repeated daily cycling.
- 430 stainless steel top with continuous weld seams
- Galvanized steel leg assembly with adjustable feet
- Commercial drawer slides rated for 10+ cycles per day
- Overshelf brackets welded to main frame uprights
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex work table from UK inventory to buyers in the UK, Europe, USA, Canada, Middle East, and Africa. The unit ships as a single 76 kg package with assembly hardware included. Freight quotations for multiple units or container orders are available on request.
Frequently Asked Questions
Q: Is this 304 or 430 grade stainless steel?
A: The worktop uses 430-grade stainless steel at 1.2mm thickness. This grade provides adequate corrosion resistance for dry and moderately wet prep applications. For operations with heavy acidic exposure, 304 grade is recommended and available on request.
Q: What is the load capacity of the main worktop?
A: The 1800mm worktop supports evenly distributed loads up to 150 kg when the galvanized leg assembly is properly leveled. Concentrated point loads should not exceed 50 kg in any 300mm section. The undershelf supports 40 kg evenly distributed.
Q: Are the legs adjustable for uneven floors?
A: Each leg terminates in an adjustable foot with 20mm vertical travel. This allows leveling on floors with minor irregularities. For slopes exceeding 15mm over 1800mm, floor correction is recommended before installation.
Q: Can a splash-back be added to the rear edge?
A: A 150mm stainless steel splash-back can be welded or bolted to the rear overshelf upright. This modification is specified at time of order. Retrofit splash-backs require field drilling and are not recommended for CE-certified units.
Q: Is custom sizing available for narrower spaces?
A: Zodex manufactures this table in 1200mm, 1500mm, 1800mm, and 2000mm widths as standard. Custom widths between 1000mm and 2400mm are available with 8-week lead time. Depth and overshelf configuration remain fixed at 700mm and 300mm respectively.