
Ask a Question About This Product
- Stock: In Stock
- Model: WS1472
- SKU: WS1472
WS1472 is a stainless steel wall-mounted shelf measuring 1820×355×255mm, used to store cookware, containers, and utensils above commercial preparation zones. The unit supports up to 50kg distributed load. It ships as a single welded assembly weighing 10kg.
Commercial Application
Wall shelves remove equipment from counters, freeing workspace for prep and plating. The 355mm depth accommodates stacked hotel pans, stockpots, and storage containers without blocking access to wall-mounted appliances. Direct wall fastening eliminates floor footprint.
During service, operators reach overhead for stored pans and tools without bending or moving from station. The 1820mm span covers standard two- or three-burner range widths. Non-porous stainless resists staining and cleans with single-pass wiping.
Key Operational Advantages
- 50kg maximum distributed load across 1820mm span
- 304-grade stainless steel with welded corner joints
- 355mm depth fits standard GN 1/1 pans and 12-inch stockpots
- 255mm vertical clearance allows stacking of two 100mm-height containers
- 10kg unit weight enables two-person installation on drywall or masonry
- Single-piece welded construction — no assembly required on site
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WS1472 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 10.0 kg (22.0 lbs) |
Construction & Build Quality
The shelf is welded from 304-grade stainless steel sheet with reinforced rear mounting plate. Corner joints are continuous-weld seams ground smooth for cleaning access. The mounting plate contains six fixing points for wall anchors.
- 304 stainless steel — food-contact approved, resists chloride corrosion
- Welded construction — no threaded fasteners in food zone
- Reinforced rear mounting plate distributes load across six anchor points
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies WS1472 from UK stock to commercial buyers in Europe, North America, Middle East, and Africa. The unit ships as a single carton suitable for courier or pallet consolidation. Lead time for standard orders is 5–7 working days within the UK.
Frequently Asked Questions
Q: What grade of stainless steel is used in the WS1472 shelf?
A: The unit is fabricated from 304-grade stainless steel. This alloy contains 18% chromium and 8% nickel, providing corrosion resistance in commercial kitchen humidity and salt exposure.
Q: What is the maximum load capacity of this wall shelf?
A: The shelf supports 50kg distributed load when fastened to solid masonry or wall studs at 400mm centres. Point loads exceeding 15kg in a single location require additional reinforcement.
Q: Can the shelf height be adjusted after installation?
A: No. The unit mounts at a fixed height determined by anchor placement. Relocating the shelf requires new anchor holes.
Q: Is a splash-back available for the rear edge of the shelf?
A: The WS1472 does not include an integral splash-back. A separate 100mm stainless steel upstand can be welded or riveted to the rear if required for hygiene compliance.
Q: Can TurcoBazaar fabricate custom lengths for specific kitchen layouts?
A: Yes. Custom spans from 1200mm to 2400mm are available with matching depth and load ratings. Minimum order quantity is two units per custom size.