



Ask a Question About This Product
This offer ends in:
Open-plan stainless steel work surface measuring 1830×760×900mm with no lower shelf. Provides 1.39 m² of hygienic food-contact workspace for prep, assembly, and plating tasks. Used in commercial kitchens where floor-level access and visibility are required beneath the table.
Commercial Application
Installed where chefs and line cooks need unobstructed floor clearance. Common in prep stations where mixing bowls, ingredient bins, or waste containers are positioned underneath. The absence of a lower shelf allows operators to stand closer to the work surface and accommodate knee-height equipment.
Deployed during high-volume prep cycles where multiple operators access the same table from different angles. Open base design permits rapid cleaning beneath the table between service periods. The 900mm working height suits standing operators handling dough rolling, vegetable portioning, and tray assembly.
Key Operational Advantages
- 1830×760mm surface provides 1.39 m² of continuous workspace without undershelf obstruction
- 27 kg net weight — one-person relocation during kitchen reconfiguration
- 201 AISI stainless steel construction with Scotch Brite finish meets CE/NSF/CSA hygiene standards
- Double-walled worktop construction rated to 500 kg distributed load capacity
- Upturned edges contain spillage and prevent liquid run-off onto floor surfaces
- Open base permits placement of mobile ingredient bins and roll-under equipment
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WTGOB3072418 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 27.0 kg (59.5 lbs) |
Construction & Build Quality
Frame and worktop fabricated from 201 AISI stainless steel with Scotch Brite brushed finish. Double-walled worktop design distributes load across reinforced perimeter frame. Upturned edge profile runs full perimeter to contain liquids during preparation tasks.
- 201 AISI stainless steel — corrosion-resistant grade suitable for dry and light-moisture food prep
- Double-walled worktop construction with reinforced frame supports up to 500 kg distributed load
- Scotch Brite brushed finish reduces visible scratching during daily use
- Upturned edges on all four sides — liquid containment and splash prevention
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Turkish-manufactured commercial kitchen equipment to operators in the UK, Europe, USA, Canada, Middle East, and Africa. This work table ships as flat-pack assembly requiring on-site leg attachment. Freight pricing available for multi-unit orders or containerised shipments.
Frequently Asked Questions
Q: What grade of stainless steel is used in the worktop?
A: 201 AISI stainless steel with Scotch Brite brushed finish. This grade provides adequate corrosion resistance for dry and light-moisture food prep environments. For high-chloride or acidic exposure, contact us regarding 304-grade alternatives.
Q: What is the maximum load capacity of the worktop?
A: Double-walled construction is rated to 500 kg distributed load. Concentrated point loads above 150 kg may cause localised deflection. Load should be distributed across the full 1.39 m² surface area for optimal performance.
Q: Are the legs height-adjustable?
A: Standard legs provide fixed 900mm working height. Adjustable bullet feet are available as aftermarket addition for minor levelling on uneven floors. Custom height specifications require minimum order quantities.
Q: Can a splash-back panel be added to this model?
A: No integrated splash-back mounting points on this open-base model. Wall-mounted splash guards can be field-installed independently. Contact us for compatible splash-back panel specifications if required.
Q: Is custom sizing available for non-standard kitchen layouts?
A: Custom dimensions available on orders above ten units with 4–6 week lead time. Minimum width increment is 100mm. Depth and height can be adjusted within structural load limits.