Commercial Worktop Floor Cupboard Sliding doors Stainless steel Width 1000mm Depth 600mm | TurcoBazaar THASR106

Commercial Worktop Floor Cupboard Sliding doors Stainless steel Width 1000mm Depth 600mm | TurcoBazaar THASR106
Commercial Worktop Floor Cupboard Sliding doors Stainless steel Width 1000mm Depth 600mm | TurcoBazaar THASR106
This offer ends in:
Days
Hours
Min
Sec
from Save -67%
£249.60
£758.40
Ex Tax: £249.60
  • Stock: In Stock
  • Brand: Zodex
  • Model: THASR106
  • SKU: THASR106
Sold: 0
Views: 798
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The THASR106 is a 1000mm wide stainless steel worktop cupboard with sliding door access and internal shelving. It provides 600mm deep workspace above enclosed storage in commercial kitchens where preparation surface and bulk ingredient storage occupy the same footprint. Kitchen managers specify this unit where sliding doors maintain aisle clearance in tight prep zones.

Commercial Application

Operators position this cupboard in central prep lines where swing doors would obstruct traffic flow. The 900mm working height matches standard prep table ergonomics. Sliding door access allows staff to retrieve dry goods, utensils, or portioned ingredients without stepping back from the worktop.

The unit functions during mise en place and service prep when multiple cooks work side-by-side. The middle shelf doubles usable storage volume for flour bags, rice containers, or plated menu components. The worktop surface handles cutting, assembly, and plating tasks while stored items remain accessible below.

Key Operational Advantages

  • 1000mm width × 600mm depth × 900mm height with 50 kg structural weight
  • Two sliding doors with internal middle shelf for vertical storage division
  • Stainless steel construction throughout for food contact compliance
  • 900mm working height aligns with commercial prep table standards
  • Sliding door mechanism preserves aisle width in confined kitchen layouts
  • CE certified for UK, EU hygiene standards; meets NSF and CSA equivalency for North American installations

Technical Specifications

SpecificationDetails
Model / SKUTHASR106
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight50.0 kg (110.2 lbs)

Construction & Build Quality

All surfaces are stainless steel construction. The middle shelf is welded or bracket-mounted depending on grade specification. Sliding door tracks are recessed to prevent food debris accumulation.

  • Full stainless steel body and internal shelf structure
  • Sliding door hardware with enclosed track assembly
  • 50 kg unit weight indicates commercial-gauge material thickness
  • Base supports 900mm height without visible leveling feet in standard configuration

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies the THASR106 from UK inventory to kitchens in Europe, North America, the Middle East, and Africa. Zodex manufactures the unit to CE standards with material certifications applicable to NSF and CSA jurisdictions. Lead time is 1–3 working days for UK dispatch.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for steel grade specification, load capacity documentation, or freight quotation to your facility. Technical guidance available via WhatsApp for integration planning.
Contact Our Team

Frequently Asked Questions

Q: Is this unit fabricated from 304 or 430 grade stainless steel?

A: Standard construction uses 430 grade stainless for the body and doors. Zodex offers 304 grade as a specified upgrade for chloride-heavy environments or export compliance. Confirm grade requirement at order to ensure material certification matches your jurisdiction.

Q: What distributed load can the worktop surface support during prep tasks?

A: The 1000mm × 600mm top accommodates typical cutting board, mixer, and ingredient container loads found in prep work. Zodex rates the surface for standard commercial use but does not publish a specific kilogram-per-square-meter figure. Contact for engineering data if mounting fixed equipment above 30 kg.

Q: Are the base supports adjustable for uneven floor conditions?

A: The standard unit ships without visible adjustable feet in product imagery. Zodex offers bolt-on leveling feet as an accessory for installations on sloped or uneven commercial flooring. Specify leveling hardware at order if required.

Q: Can a splashback be added to the rear edge for wall-mounted installations?

A: Zodex fabricates welded or bolt-on splashbacks in 100mm or 150mm height upon request. Splashback addition requires specification before manufacture. Retrofitting a splashback after delivery involves field drilling and is not recommended for hygiene compliance.

Q: Is custom width or depth available if 1000mm × 600mm does not fit the available space?

A: Zodex manufactures the THASR series in incremental widths from 600mm to 2000mm and depths of 600mm or 700mm. Custom sizing requires minimum order discussion and extends lead time to 3–4 weeks. Provide exact dimensions and door configuration preference for quotation.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.