





Ask a Question About This Product
This offer ends in:
The QNH104 is a double-tier overshelf unit measuring 1200x280x600mm, manufactured from stainless steel with square tube framing. It mounts above worktables or preparation counters to store ingredients, utensils, and small equipment at accessible height. Weighs 8.2 kg and arrives flat-packed for on-site assembly.
Commercial Application
Most commercial kitchens require vertical storage to keep preparation ingredients within arm's reach without occupying counter space. This unit positions two shelves directly above work zones, reducing movement between storage and prep stations during high-volume service periods.
Operators use upper tiers for dry ingredients, bottled condiments, or portioned mise en place. The lower tier typically holds frequently accessed items during service. The 280mm depth prevents the unit from obstructing sight lines across pass counters.
Key Operational Advantages
- 1200mm width spans standard worktable dimensions
- Square tube construction provides lateral rigidity under asymmetric loading
- 280mm depth footprint clears typical hood clearances
- 600mm vertical height accommodates two storage tiers with adequate clearance between levels
- 8.2 kg unit weight permits single-person installation without overhead lifting equipment
- Flat-pack delivery reduces freight volume and assembly time on-site
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | QNH104 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 8.2 kg (18.1 lbs) |
Construction & Build Quality
Frame uses square-section stainless steel tubing welded at corners. Shelf surfaces are stainless steel sheet formed with turned edges to prevent drip migration. All welds are ground flush to eliminate bacterial harbour points during cleaning cycles.
- Stainless steel construction meets CE hygiene standards for food contact surfaces
- Square tube framing resists torsional deflection under uneven shelf loading
- Turned shelf edges contain spills and prevent liquid transfer to lower tiers
- Welded joints eliminate fastener corrosion in high-humidity environments
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex-manufactured unit from UK inventory to commercial buyers in Europe, North America, the Middle East, and Africa. Freight quotations account for flat-pack dimensions and pallet consolidation for multi-unit orders. Lead times vary by destination.
Frequently Asked Questions
Q: What grade of stainless steel is used in the QNH104?
A: Zodex typically uses 430-grade stainless steel for overshelf construction. This grade provides corrosion resistance in kitchen environments and meets CE food contact standards. Confirm material grade with TurcoBazaar if NSF certification is required for your jurisdiction.
Q: What is the load-bearing capacity per shelf tier?
A: Square tube framing typically supports 15-20 kg per tier when load is distributed evenly across the shelf surface. Concentrated point loads reduce capacity. Contact TurcoBazaar for load testing data if storing heavy equipment.
Q: Can the shelf height be adjusted after installation?
A: The QNH104 has fixed shelf positions set during assembly. Shelf spacing is predetermined by the 600mm total height and two-tier design. Custom shelf spacing requires modification during fabrication.
Q: Does this unit include a splash-back panel?
A: The QNH104 is an open frame overshelf without rear or side panels. Splash-backs are typically ordered separately and mounted to the wall behind the unit. TurcoBazaar can quote splash-back panels sized to match this overshelf width.
Q: Are custom dimensions available for non-standard table widths?
A: Zodex manufactures overshelves in standard increments. Custom widths require minimum order quantities and extended lead times. Provide table dimensions and mounting surface details to TurcoBazaar for feasibility assessment.