







Ask a Question About This Product
This offer ends in:
The DIBS2FB101410 is a drop-in two-bowl bar sink fabricated from 304 stainless steel. It provides dual-bowl washing capacity in a 635×546 mm footprint with 254×356×254 mm bowls. Operators use it for glassware washing, utensil cleaning, and bar prep hygiene in licensed premises, hotels, and high-volume food service.
Commercial Application
Drop-in installation allows retrofitting into existing counter openings without full worktop replacement. Two separate bowls enable wash-rinse workflow or parallel utensil cleaning during service. Left-corner drain routing keeps plumbing compact in tight bar or prep configurations.
The 254 mm bowl depth accommodates tall glassware and large mixing vessels. Operators use one bowl for washing and the second for sanitising rinse or draining clean items. 1.5-inch drain baskets trap debris before plumbing, reducing blockage frequency.
Key Operational Advantages
- 304 stainless steel construction resists corrosion from detergents and acidic liquids
- 1.3 mm top and 1.0 mm bowl gauge provide commercial durability at 11 kg total weight
- 254×356×254 mm bowl dimensions fit standard commercial glassware and bar tools
- Left-corner drain with 8-inch overflow pipe suits compact plumbing layouts
- Drop-in design allows counter-level installation without undermount brackets
- CE-certified to UK, EU, NSF (USA), and CSA (Canada) commercial hygiene standards
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | DIBS2FB101410 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 11.0 kg (24.3 lbs) |
Construction & Build Quality
Bowls and top deck are welded 304-grade stainless steel with brushed finish. The 1.3 mm top provides rigidity around the cut-out perimeter. Bowl walls are 1.0 mm gauge, formed and welded at corners to eliminate seams where bacteria can harbour.
- 304 stainless steel throughout (top and bowls) — no mixed grades
- Brushed satin finish hides minor scratches during daily use
- 1.5-inch basket strainers and 8-inch overflow pipes included with unit
- Welded corner joints eliminate crevices in bowl interior
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial sinks from UK stock to buyers in the UK, Europe, USA, Canada, Middle East, and Africa. Units typically dispatch within 1–3 working days. Freight options include pallet delivery for multi-unit orders or smaller parcel services for single sinks.
Frequently Asked Questions
Q: Is this 304 or 430 grade stainless steel?
A: The DIBS2FB101410 uses 304-grade stainless steel for both top deck and bowls. 304 offers better corrosion resistance than 430 in commercial washing environments with detergents and acidic cleaners.
Q: What is the maximum load capacity for the counter opening?
A: The sink weighs 11 kg empty. When filled, each bowl holds approximately 15 litres, adding 30 kg at capacity. Counter supports must bear at least 50 kg across the 635×546 mm opening to allow for dynamic loads during use.
Q: Can I install this without undermount brackets?
A: Yes. Drop-in design sits on the counter cut-out rim; the top flange rests on the worktop. Seal with silicone around the perimeter to prevent water ingress beneath the flange.
Q: Are adjustable legs or splash-backs available?
A: This unit is a drop-in sink only, without legs or integral splash-back. If a freestanding sink with legs is required, contact TurcoBazaar for alternative models in the Zodex range.
Q: Can I order a custom bowl size or drain position?
A: The DIBS2FB101410 is a standard production model with fixed dimensions and left-corner drain. Custom sizing or drain relocation requires factory special order with longer lead time and minimum quantity. Contact for feasibility and pricing.