Drop-in Sink 1 bowl Stainless steel | TurcoBazaar DIS1DB090905

Drop-in Sink 1 bowl Stainless steel | TurcoBazaar DIS1DB090905
Drop-in Sink 1 bowl Stainless steel | TurcoBazaar DIS1DB090905
Drop-in Sink 1 bowl Stainless steel | TurcoBazaar DIS1DB090905
3-4 Weeks
Drop-in Sink 1 bowl Stainless steel | TurcoBazaar DIS1DB090905
Drop-in Sink 1 bowl Stainless steel | TurcoBazaar DIS1DB090905
Drop-in Sink 1 bowl Stainless steel | TurcoBazaar DIS1DB090905
Drop-in Sink 1 bowl Stainless steel | TurcoBazaar DIS1DB090905
This offer ends in:
Days
Hours
Min
Sec
from Save -59%
£45.60
£110.40
Ex Tax: £45.60
  • Stock: 3-4 Weeks
  • Brand: Zodex
  • Model: DIS1DB090905
  • SKU: DIS1DB090905
Sold: 0
Views: 818
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The DIS1DB090905 is a single-bowl drop-in sink built for light-duty commercial prep areas. Bowl dimensions are 229×229×127mm, overall footprint 355×305mm. Fabricated from 304 stainless steel with a drawn bowl construction.

Commercial Application

Drop-in sinks fit pre-cut countertop apertures in prep stations, service areas, or mobile carts. This unit handles handwashing, utensil rinsing, and light vegetable prep where a compact bowl footprint is required. Bowl depth of 127mm accommodates standard commercial drain fittings.

Typically installed in bar setups, coffee stations, or secondary prep zones where full three-compartment sinks are not required. The 4kg weight allows retrofitting into existing worktops without structural reinforcement. Gooseneck faucet sold separately; specify hole configuration when ordering.

Key Operational Advantages

  • 304 stainless steel top and bowl — corrosion-resistant, food-contact grade
  • Drawn bowl construction — no seams or joints in basin
  • 355×305mm overall footprint — fits standard countertop cutouts
  • Bowl depth 127mm — accommodates P-trap and standard waste fittings
  • 4kg unit weight — single-person installation
  • CE certified for UK and EU commercial hygiene standards

Technical Specifications

SpecificationDetails
Model / SKUDIS1DB090905
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight4.0 kg (8.8 lbs)

Construction & Build Quality

Top and bowl are both fabricated from 304 stainless steel. Bowl is press-drawn from a single sheet, eliminating welded seams where bacteria can accumulate. Underside features sound-deadening pads on Zodex models to reduce noise during use.

  • 304 grade stainless steel throughout — 8% nickel content for superior corrosion resistance
  • Drawn bowl — single-piece fabrication without welded corners
  • Satin finish on top surface — hides minor scratches during service

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies Zodex drop-in sinks from UK inventory to customers in the UK, Europe, USA, Canada, Middle East, and Africa. Lead time is 1–3 working days for stock items. International freight is calculated based on destination and order volume.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical drawings, cutout templates, or freight quotations on commercial sink installations. WhatsApp enquiries accepted for rapid response on stock availability and lead times.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is used in the bowl and top?

A: Both bowl and top are fabricated from 304 stainless steel. This grade contains 8% nickel and resists corrosion from acidic foods, detergents, and chlorinated water.

Q: What is the maximum safe load for the countertop around the sink cutout?

A: The sink itself weighs 4kg. Countertop load capacity depends on substrate material and support framework. Consult a fabricator if the worktop is thinner than 30mm or unsupported spans exceed 600mm.

Q: Are adjustable legs or undershelf brackets included?

A: No. This is a drop-in unit designed to sit in a countertop cutout. Legs and shelving are supplied with freestanding sink tables, not drop-in bowls.

Q: Can a splashback be added to this sink unit?

A: Splashbacks are typically welded to freestanding sink tables. For drop-in units, a splashback is part of the countertop or wall-mounted separately. Custom fabrication is available on request.

Q: Is custom sizing available for non-standard countertop cutouts?

A: Zodex manufactures drop-in sinks to order in sizes from 300mm to 700mm width. Minimum order quantities and extended lead times apply. Submit dimensions for a quotation.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.